Brother QL-1060N Panduan Pengguna Jaringan - Halaman 16

Jelajahi secara online atau unduh pdf Panduan Pengguna Jaringan untuk Pembuat label Brother QL-1060N. Brother QL-1060N 42 halaman. Label printer
Juga untuk Brother QL-1060N: Panduan Pengguna (42 halaman), Panduan Pengguna Perangkat Lunak (40 halaman), Panduan Pengguna Jaringan (48 halaman), Panduan Pengguna Perangkat Lunak (48 halaman), Panduan Pengguna Jaringan (41 halaman), Panduan Pengguna (40 halaman), Panduan Pengguna (48 halaman), Panduan Pengguna (41 halaman), Panduan Pengguna (24 halaman)

Double-click the unconfigured device.

Windows

Note

• If the print server is set to its factory default settings without using a DHCP/BOOTP/RARP server, the

device will appear as Unconfigured in the BRAdmin Light utility screen.

• If the device requires a password, the default password is access.

• You can find the node name and Ethernet address by printing out the Printer Settings Page. See Printing

the Printer Settings on page 14.

Choose Static from Boot Method. Enter the IP address, Subnet Mask and Gateway (if needed) of

your print server.

Windows

Click OK.

With the correctly programmed IP address, you will see the Brother print server in the device list.

Macintosh

Configuring your network printer