AEG L61470WDBI Panduan Pengguna - Halaman 16

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Mesin cuci AEG L61470WDBI. AEG L61470WDBI 40 halaman.
Juga untuk AEG L61470WDBI: Panduan Pengguna (36 halaman)

Halaman Cetak

www.aeg.com

The indicator Washing is on to indicate

that the appliance starts operating.

The indicator Drying is on to indicate the

door is locked.

If you have chosen a delayed start with

button Delay Start, the appliance will

begin the countdown.

If you set an incorrect option, the yellow

indicator of button Start/Pause blinks for

3 times. The display shows the message

Err for some seconds.

10.5 Starting a programme

with the delay start

Set this option after you have set the

programme and before you press button

Start/Pause.Before you start the

programme, if you wish to delay the

programme start, press button Delay

Start repeatedly, to set the desired delay.

The symbol

The wash programme can be delayed

from 30 min. - 60 min. - 90 min., 2 hours

and then by 1 hour up to a maximum of

20 hours.

The set delay time value appears on the

display for about 3 seconds, then the

duration of the programme appears

again.

You can modify or cancel the delay time

at any moment, before you press button

Start/Pause.

The door will be locked throughout the

delay time. If you wish to add laundry in

the appliance during the delay time,

press the button Start/Pause to set the

appliance to pause. When the indicator

Door goes off , the door can be opened.

Add the laundry, close the door and

press button Start/Pause again.

Setting the delayed start.

• Set the programme and the required

options.

• Set the delay start.

• Press button Start/Pause: the

appliance starts its hourly countdown.

The programme starts after the

selected delay has expired.

Cancelling the delayed start

appears on the display.

• Press button Start/Pause to set the

appliance to PAUSE;

• Press button Delay Start until the

symbol

' is displayed;

• Press button Start/Pause again to

start the programme.

The set delay can be

changed only after you have

set the washing programme

again.

The Delay Start cannot be set with Drain

programme.

10.6 Altering an option or a

running programme

It is possible to change some options

before the programme carries it out.

Before you make any change, you must

press button Start/Pause to pause the

appliance.

Changing a running programme is

possible only by resetting it.

Turn the programme dial to

to the new programme position.

Press Start/Pause button again to start

the new programme. The washing water

in the tub will not emptied out.

10.7 Interrupting a

programme

Press button Start/Pause to interrupt a

programme which is running, the

corresponding indicator starts blinking.

Press button Start/Pause again to restart

the programme.

10.8 Cancelling a running

programme

Turn the selector dial to

programme which is running. Now you

can select a new programme.

Before starting the new

programme the appliance

could drain the water. In this

case, make sure that the

detergent is still in the

detergent compartment, if

not fill the detergent again.

and then

to cancel a