AEG L6FBG142R Panduan Pengguna - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Mesin cuci AEG L6FBG142R. AEG L6FBG142R 40 halaman.
Juga untuk AEG L6FBG142R: Panduan Pengguna (36 halaman), Panduan Pengguna (44 halaman)
Halaman Cetak
8
www.aeg.com
Attach the sound barriers at
a room temperature.
13. Pull up the appliance in vertical
position.
14. Remove the power supply cable and
the drain hose from the hose holders.
It is possible to see water
flowing from the drain hose.
This is due to the testing
with the appliance of water
in factory.
15. Remove the three bolts by using the
key supplied with the appliance.
16. Pull out the plastic spacers.
17. Put the plastic caps, that you find in
the user manual bag, in the holes.
We recommend that you
keep the packaging and the
transit bolts for any
movement of the appliance.
3.2 Installation on suspended
flooring
Suspended wooden floors are
particularly susceptible to vibration.
To limit vibration we recommend placing
a waterproof wooden panel, at least 15
mm thick, under the appliance. It should
be screwed to at least 2 floor beams and
should extend beyond the front feet.
If possible, install the appliance where
the floor is more stable.
3.3 Positioning and levelling
1. Install the appliance on a flat hard
floor.
Make sure that the
appliance does not touch
the wall or other units.
2. Loosen or tighten the feet to adjust
the level.
WARNING!
Do not put cardboard, wood
or equivalent materials
below the appliance feet to
adjust the level.