Brother Stampcreator PRO SC2000USB Referensi Cepat - Halaman 18
Jelajahi secara online atau unduh pdf Referensi Cepat untuk Pembuat label Brother Stampcreator PRO SC2000USB. Brother Stampcreator PRO SC2000USB 36 halaman.
Halaman Cetak
b Engrave a stamp with the stamp design created in step 1.
Click
to display the Print Properties. (If they are already displayed,
skip this step.)
Click
in the Print Properties to display the Printer Setup dialog
box.
Check that "Brother SC-2000USB" is selected below "Application
Matching Printer", and then click the OK button.
Click
in the Print Properties. The Print dialog box appears.
Select "Stamp", and then select the appropriate "Document Type"
setting.
Logo: Best for stamps with a logo mark
Text: Good for stamps with text only
Text+Photo: Good for stamps with text and photos (graphics)
Photo: Best for stamps containing photos with a "Photo Enhance"
effect applied.
Then, click the Print button to start printing a draft sheet.
For details on engraving a stamp, refer to the section "Engraving a
stamp" on page 22 of this Quick Reference.
c Print an ID label.
Click
in the Print Properties. The Print dialog box appears.
Select "ID Label", and then select the appropriate "Document Type"
setting.
Insert an ID label sheet into the ID Label Slot of the SC-2000USB, then
click the Print button to start ID label printing.
For details on printing an ID label, refer to the section "Printing an ID
label for the engraved stamp" on page 24 of this Quick Reference.
For details on assembling a stamp, refer to the section "Assembling the
Stamp" on page 25 of this Quick Reference.
15