Fujitsu BX630 - PRIMERGY - S2 Dual Panduan Suplemen Servis - Halaman 35

Jelajahi secara online atau unduh pdf Panduan Suplemen Servis untuk Server Fujitsu BX630 - PRIMERGY - S2 Dual. Fujitsu BX630 - PRIMERGY - S2 Dual 47 halaman. Scalable server-blade
Juga untuk Fujitsu BX630 - PRIMERGY - S2 Dual: Panduan Suplemen Servis (49 halaman)

Halaman Cetak

Diagnosis and Maintenance

5.2

Recovering the Server Blade BIOS

This section describes how to recover the BIOS of a server blade in the event

of an error.

ATTENTION!

This procedure must only be used in the event of an error.

Requirements

– The basic unit is connected to the mains.

– The server blade has been switched off.

– An external floppy disk drive is present.

Creating a BIOS flash floppy disk

Ê Extract the BIOS update ZIP archive file on a PC hard disk.

The data for creating the BIOS flash floppy disk is contained in the

software pool

http://support.fujitsu-siemens.com/com/support/downloads.html.

Ê Insert an empty DOS boot disk into the floppy disk drive.

Ê Copy the files containg in the ZIP archive to the DOS boot disk to create a

BIOS flash diskette.

Recovering the server blade BIOS

Ê Connect the monitor, keyboard and mouse to the KVM connector on the rear

of the blade server chassis, see Operating Manual.

Ê Remove the server blade from the blade server chassis (see

open it.

BX630 S2

Recovering the Server Blade BIOS

Service Supplement

page

17) and