Brother FAX 1840C Panduan Pengaturan Cepat - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Pengaturan Cepat untuk Mesin Faks Brother FAX 1840C. Brother FAX 1840C 16 halaman. Quick setup guide - french
Juga untuk Brother FAX 1840C: Daftar Referensi Bagian (28 halaman), Panduan Pengaturan Cepat (18 halaman), Panduan Pengaturan Cepat (28 halaman), (Bahasa Prancis) Manual De Configuration Rapide (16 halaman)
Setting Up the Machine
Removing the Protective
1
Parts
1
Remove the protective tape and paper.
Installing the Handset
2
1
Connect the curled handset cord to the
machine and the other end to the handset.
Loading Paper
3
You can load up to 100 sheets of 80 g/m
paper.
For more details, see "About paper" in
Chapter 1 of the User's Guide.
1
Pull the paper tray completely out of the
machine and remove the output paper tray.
4
2
Press and slide the paper guide to fit the
paper width.
Paper Side Guide
3
Pull out the paper support and unfold the
paper support flap.
Paper Support Flap
Use the paper support flap for Letter, Legal
and A4 size paper.
4
Fan the stack of paper well to avoid paper
jams and mis-feeds.
2
5
Gently insert the paper into the paper tray
print side down and top edge first.
Check that the paper is flat in the tray and
below the maximum paper mark.
■ Make sure the paper side guides touch the
sides of the paper.
■ Be careful that you do not push the paper
in too far; it may lift at the back of the tray
and cause paper feed problems.
6
Put the output paper tray back on and push
the paper tray firmly back into the machine.
Paper Support