Fujitsu ETERNUS DX Disk Panduan Konfigurasi - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Server Fujitsu ETERNUS DX Disk. Fujitsu ETERNUS DX Disk 44 halaman. Server connection, fcoe for linux driver settings for converged network adapter cards
Juga untuk Fujitsu ETERNUS DX Disk: Panduan Pengguna (35 halaman), Panduan Pengguna (42 halaman), Panduan Konfigurasi (28 halaman), Panduan Konfigurasi (28 halaman), Panduan Konfigurasi (29 halaman), Panduan Konfigurasi (25 halaman), Panduan Konfigurasi (32 halaman), Panduan Konfigurasi (35 halaman), Panduan Konfigurasi (31 halaman), Panduan Konfigurasi (43 halaman), Panduan Konfigurasi (21 halaman), Panduan Konfigurasi (24 halaman)

Halaman Cetak
Fujitsu ETERNUS DX Disk Panduan Konfigurasi
Chapter 1
Workflow
1.1
For Fujitsu Drivers
When the ETERNUS Multipath Driver or the GR
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris
Multipath Driver is used
8
Copyright 2015 FUJITSU LIMITED
When the ETERNUS Multipath Driver or the GR
Multipath Driver is not used
Setting Up the Server
Edit the setup file (/kernel/drv/fjpfca.conf) to set
the parameters required for connection.
"Chapter 7 Installing Drivers and Setting Up
•
the Server" (page 36)
•
Setting up the server
"FUJITSU Storage ETERNUS DX Configuration
-
Guide -Server Connection- (Fibre Channel)
for Oracle Solaris Driver Settings for Fujitsu
Fibre Channel Cards"
Setting Up the Server to Recognize the Logical
Units
The sd or hddv driver is used to recognize the
ETERNUS DX's logical units.
Label the LUNs using the "format" command.
"Chapter 8 Setting Up the Server to Recognize
•
the Logical Units" (page 37)
•
Have the server recognize the ETERNUS DX
LUNs.
"FUJITSU Storage ETERNUS DX Configuration
-
Guide -Server Connection- (Fibre Channel)
for Oracle Solaris Driver Settings for Fujitsu
Fibre Channel Cards"
When VxVM is used
When VxVM is not used
Jump to Step 7
Creating Volume
P3AM-3702-16ENZ0