Fujitsu ETERNUS DX Disk Panduan Konfigurasi - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Server Fujitsu ETERNUS DX Disk. Fujitsu ETERNUS DX Disk 29 halaman. Server connection, fcoe for linux driver settings for converged network adapter cards
Juga untuk Fujitsu ETERNUS DX Disk: Panduan Pengguna (35 halaman), Panduan Pengguna (42 halaman), Panduan Konfigurasi (28 halaman), Panduan Konfigurasi (44 halaman), Panduan Konfigurasi (28 halaman), Panduan Konfigurasi (25 halaman), Panduan Konfigurasi (32 halaman), Panduan Konfigurasi (35 halaman), Panduan Konfigurasi (31 halaman), Panduan Konfigurasi (43 halaman), Panduan Konfigurasi (21 halaman), Panduan Konfigurasi (24 halaman)

This manual briefly explains the operations that need to be performed by the user in order to connect an

ETERNUS DX/AF to a server running Solaris OS and using Fujitsu Fibre Channel cards via a Fibre Channel inter-

face.

This manual is used when performing the setup procedure described in "Installing Drivers and Setting Up the

Server" and "Recognizing the Logical Units" of the "Configuration Guide -Server Connection- (Fibre Channel)

for Oracle Solaris".

This manual should be used in conjunction with any other applicable user manuals, such as those for the

ETERNUS DX/AF, server, OS, Fibre Channel cards, and drivers.

Refer to "Configuration Guide -Server Connection- Notations" for the notations used in this manual such as

product trademarks and product names. For storage systems that are supported by the OS, refer to the Server

Support Matrix of the ETERNUS DX/AF.

The Contents and Structure of this Manual

This manual is composed of the following six chapters and an appendix.

"Chapter 1 Workflow" (page 5)

•

This chapter describes the workflow required to establish a connection between a server with Fujitsu Fibre

Channel cards and an ETERNUS DX/AF.

"Chapter 2 Installing the Fibre Channel Card Driver" (page 7)

•

This chapter describes how to install the Fibre Channel card driver.

"Chapter 3 Installing the hddv Driver" (page 8)

•

This chapter describes how to install the hddv driver that is required when connecting the ETERNUS DX/AF

storage systems and a Fujitsu driver equipped server in a single-path configuration.

"Chapter 4 Setting Up the Server" (page 9)

•

This chapter describes how to set up the server for different connection topologies.

"Chapter 5 Setting Up the Server to Recognize the Logical Units" (page 18)

•

This chapter describes how to make the server recognize the LUNs of the ETERNUS DX/AF.

"Chapter 6 Required Driver Parameters" (page 22)

•

This chapter describes how to set up the Fujitsu Fibre Channel card driver.

An appendix contains the various management tables that are used in "Chapter 4 Setting Up the Server".

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris

Preface

15th Edition

April 2017

P3AM-3712-15ENZ0