Fujitsu ETERNUS DX Disk Panduan Konfigurasi - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Server Fujitsu ETERNUS DX Disk. Fujitsu ETERNUS DX Disk 32 halaman. Server connection, fcoe for linux driver settings for converged network adapter cards
Juga untuk Fujitsu ETERNUS DX Disk: Panduan Pengguna (35 halaman), Panduan Pengguna (42 halaman), Panduan Konfigurasi (28 halaman), Panduan Konfigurasi (44 halaman), Panduan Konfigurasi (28 halaman), Panduan Konfigurasi (29 halaman), Panduan Konfigurasi (25 halaman), Panduan Konfigurasi (35 halaman), Panduan Konfigurasi (31 halaman), Panduan Konfigurasi (43 halaman), Panduan Konfigurasi (21 halaman), Panduan Konfigurasi (24 halaman)

Halaman Cetak

Fujitsu ETERNUS DX Disk Panduan Konfigurasi

This manual briefly explains the operations that need to be performed by the user in order to connect an

ETERNUS DX/AF to a server running Citrix

This manual should be used in conjunction with any other applicable user manuals, such as those for the

ETERNUS DX/AF, server, OS, Fibre Channel cards, and drivers.

Refer to "Configuration Guide -Server Connection- Notations" for the notations used in this manual such as

product trademarks and product names. For storage systems that are supported by the OS, refer to the Server

Support Matrix of the ETERNUS DX/AF.

The Contents and Structure of this Manual

This manual is composed of the following nine chapters.

"Chapter 1 Workflow" (page 8)

•

This chapter describes how to connect the ETERNUS DX/AF storage systems to a server running Citrix

Server

"Chapter 2 Checking the Server Environment" (page 11)

•

This chapter describes which servers can be connected to ETERNUS DX/AF storage systems.

"Chapter 3 Notes" (page 12)

•

This chapter describes issues that should be noted when connecting the ETERNUS DX/AF storage systems

and server.

•

"Chapter 4 Checking Fibre Channel Card Information" (page 14)

This chapter describes the Fibre Channel card WWNs that are required for ETERNUS DX/AF settings and Fi-

bre Channel switch settings.

"Chapter 5 Installing and Setting Up ETERNUSmgr" (page 15)

•

This chapter describes how to install ETERNUSmgr.

"Chapter 6 Setting Up the ETERNUS DX/AF" (page 16)

•

This chapter describes how to set up an ETERNUS DX/AF.

"Chapter 7 Setting Up the Fibre Channel Switches" (page 17)

•

This chapter describes how to set up the Fibre Channel switches.

"Chapter 8 Setting Up XenServer" (page 19)

•

This chapter describes how to set up Citrix

"Chapter 9 SAN Boot" (page 30)

•

This chapter provides notes for SAN Boot.

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Citrix

XenServer

via a Fibre Channel interface.

XenServer

Preface

19th Edition

December 2017

Xen-

XenServer

P3AM-4572-19ENZ0