Fujitsu ETERNUS DX Disk Panduan Konfigurasi - Halaman 34

Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Server Fujitsu ETERNUS DX Disk. Fujitsu ETERNUS DX Disk 43 halaman. Server connection, fcoe for linux driver settings for converged network adapter cards
Juga untuk Fujitsu ETERNUS DX Disk: Panduan Pengguna (35 halaman), Panduan Pengguna (42 halaman), Panduan Konfigurasi (28 halaman), Panduan Konfigurasi (44 halaman), Panduan Konfigurasi (28 halaman), Panduan Konfigurasi (29 halaman), Panduan Konfigurasi (25 halaman), Panduan Konfigurasi (32 halaman), Panduan Konfigurasi (35 halaman), Panduan Konfigurasi (31 halaman), Panduan Konfigurasi (21 halaman), Panduan Konfigurasi (24 halaman)

Halaman Cetak
Fujitsu ETERNUS DX Disk Panduan Konfigurasi
Chapter 11
Storage Migration
(ii)
(iii)
FUJITSU Storage ETERNUS AF, ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel) for HP-UX
<Information collected before migration>
# vgdisplay -v
--- Volume groups ---
(Omitted)
VG Name
/dev/vg01
VG Write Access
read/write
VG Status
available
(Omitted)
Cur LV
1
Open LV
1
Max PV
16
Cur PV
1
Act PV
1
Max PE per PV
5119
VGDA
2
PE Size (Mbytes)
4
Total PE
5119
Alloc PE
5000
Free PE
119
Total PVG
0
Total Spare PVs
0
Total Spare PVs in use
0
--- Logical volumes ---
LV Name
LV Status
LV Size (Mbytes)
Current LE
Allocated PE
Used PV
--- Physical volumes ---
PV Name
PV Name
PV Status
Total PE
Free PE
Autoswitch
Proactive Polling
From the results of the "ioscan -fkn" command collected before migration, check the H/W
paths for the Primary Link (device name = /dev/dsk/c2t0d0) and the Alternate Link (device
name = /dev/dsk/c4t0d0).
For /dev/vg01, the H/W path for the Primary Link is "0/2/0/0/0/0.202.2.0.2.0.0", and the H/W
path for the Alternate Link is "0/4/0/0/0/0.10.1.0.2.0.0".
<Information collected before migration>
# ioscan -kfn
Class
I
H/W Path
===========================================================================================================
(omitted)
disk
4
0/2/0/0/0/0.202.2.0.2.0.0
(omitted)
0/4/0/0/0/0.10.1.0.2.0.0
disk
12
(omitted)
Check the adapter number for each H/W path, and the LUN for the device recognized by the
adapter.
vg01 H/W path
0/2/0/0/0/0.202.2.0.2.0.0
adapter number
LUN
The adapter number for the Primary Link for vg01 is "0/2/0/0/0/0", and the LUN is "0".
The adapter number for the Alternate Link for vg01 is "0/4/0/0/0/0", and the LUN is "0".
Copyright 2020 FUJITSU LIMITED
/dev/vg01/lvol1
available/syncd
20000
5000
5000
1
fDevice name of the Primary Link (blank)
/dev/dsk/c2t0d0
/dev/dsk/c4t0d0
Alternate Link
available
5119
119
On
On
Driver
S/W State
sdisk
CLAIMED
/dev/dsk/c2t0d0
/dev/rdsk/c2t0d0
sdisk
CLAIMED
/dev/dsk/c4t0d0
/dev/rdsk/c4t0d0
34
fDefine vg01.
fDevice name of the Alternate Link
H/W Type
Description
DEVICE
FUJITSU ETERNUS_DX400
DEVICE
FUJITSU ETERNUS_DX400
P3AM-3772-22ENZ0