Fujitsu ETERNUS DX Disk Panduan Konfigurasi - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Server Fujitsu ETERNUS DX Disk. Fujitsu ETERNUS DX Disk 21 halaman. Server connection, fcoe for linux driver settings for converged network adapter cards
Juga untuk Fujitsu ETERNUS DX Disk: Panduan Pengguna (35 halaman), Panduan Pengguna (42 halaman), Panduan Konfigurasi (28 halaman), Panduan Konfigurasi (44 halaman), Panduan Konfigurasi (28 halaman), Panduan Konfigurasi (29 halaman), Panduan Konfigurasi (25 halaman), Panduan Konfigurasi (32 halaman), Panduan Konfigurasi (35 halaman), Panduan Konfigurasi (31 halaman), Panduan Konfigurasi (43 halaman), Panduan Konfigurasi (24 halaman)

Halaman Cetak
Fujitsu ETERNUS DX Disk Panduan Konfigurasi
This manual briefly explains the operations that need to be performed by the user in order to connect an
ETERNUS DX to a server running Linux and using Converged Network Adapter cards via an FCoE interface.
This manual is used when performing the setup procedure described in "Installing Drivers and Setting Up the
Server" of the "Configuration Guide -Server Connection- (FCoE) for Linux".
This manual should be used in conjunction with any other applicable user manuals, such as those for the
ETERNUS DX, server, OS, Converged Network Adapter cards, and drivers.
Refer to "Configuration Guide -Server Connection- Notations" for the notations used in this manual such as
product trademarks and product names. For storage systems that are supported by the OS, refer to the Server
Support Matrix of the ETERNUS DX.
The Contents and Structure of this Manual
This manual is composed of the following two chapters.
"Chapter 1 Setup Procedure for Emulex Converged Network Adapter Cards" (page 5)
•
This chapter describes how to set up the server and Emulex Converged Network Adapter card driver when
connecting to the server via Emulex Converged Network Adapter cards.
•
"Chapter 2 Setup Procedure for QLogic Converged Network Adapter Cards" (page 11)
This chapter describes the workflow required to establish a connection between a server with QLogic Con-
verged Network Adapter cards and an ETERNUS DX.
An appendix contains a WWN instance management table for servers, for use in "Setting Up the Converged
Network Adapter Cards".
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (FCoE) for Linux
Copyright 2018 FUJITSU LIMITED
3
Preface
11th Edition
April 2018
P3AM-6402-11ENZ0