Fujitsu FUTRO S9010 Panduan Pengoperasian - Halaman 18

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Server Fujitsu FUTRO S9010. Fujitsu FUTRO S9010 36 halaman.

Halaman Cetak

Getting started

Getting started
Gettingstarted
Please observe the safety information in the

Setting up the device

In order to ensure that the casing is sufficiently ventilated and to prevent overheating,
the device must only be operated with the base foot attached.
If the device is to be built-in, adequate ventilation must be assured.
Fit the base feet for horizontal or vertical operation (see
position", Page 14

Vertical operating position

Operatingposition,vertical
Verticaloperatingposition
Base feet
Sidecover
If you wish to operate the device in the vertical operating position, use
the two feet supplied for vertical operation.
Only mount the feet on the device side shown in the diagrams.
If connecting many cables to the device, ensure that the device is in a stable
position, in order to prevent it from toppling over.
Proceed as follows to prepare the device for the vertical operating position:
► Disconnect the cables if required.
► Lay the device on its top (narrow side) as shown, on a stable, flat and clean surface.
14
and
"Horizontal operating position", Page
"Important notes", Page 11
"Vertical operating
16).
chapter.
Fujitsu