Fujitsu Primergy BX620 S2 Panduan Konfigurasi Sistem Dan Informasi Pesanan - Halaman 12
Jelajahi secara online atau unduh pdf Panduan Konfigurasi Sistem Dan Informasi Pesanan untuk Server Fujitsu Primergy BX620 S2. Fujitsu Primergy BX620 S2 18 halaman.
Halaman CetakPRIMERGY BX620 S2 / BX620 S3
Switch Blade
Data Sheet
Type
Base Unit
PGBSW1040 (*1) / PGBSW1041 (*2) / PGBSW1042 (*3) / PGBSW1043 (*4)
CTO optional
LAN Interfaces Internal
External
Dimensions (W x D x H (mm) )
*1. This is the type of Switch Blade which is mounted on Network Blade Slot 1 of BX600 S2 Blade Server System Unit.
*2. This is the type of Switch Blade which is mounted on Network Blade Slot 2 of BX600 S2 Blade Server System Unit.
When Switch Blade (PGBSW1041) is ordered, Switch Blade (PGBSW1040) or Switch Blade (PGBSW1050) or GbE Pass-Thru Blade(PGBLNB1010) should be ordered at a time.
When Switch Blade (PGBSW1051) is ordered, Switch Blade (PGBSW1040) or Switch Blade (PGBSW1050) or GbE Pass-Thru Blade(PGBLNB1010) should be ordered at a time.
*3. This is the type of Switch Blade which is mounted on Network Blade Slot 3 of BX600 S2 Blade Server System Unit.
*4. This is the type of Switch Blade which is mounted on Network Blade Slot 4 of BX600 S2 Blade Server System Unit.
When Switch Blade (PGBSW1043) is ordered, Switch Blade (PGBSW1042) or Switch Blade (PGBSW1052) or GbE Pass-Thru Blade(PGBLNB1012) should be ordered at a time.
When Switch Blade (PGBSW1053) is ordered, Switch Blade (PGBSW1042) or Switch Blade (PGBSW1052) or GbE Pass-Thru Blade(PGBLNB1012) should be ordered at a time.
*. When Switch Blade (PG-SW104/PG-SW105) are mounted on Network Blade Slot 3,4 of BX600 S2 Blade Server System Unit (PGUR3SC1),
the card on Expansion Board Slot of BX620 S2 / BX620 S3 should be 1Gbit/s Ethernet I/O Module(PG-LND101).
BX620 S2 / BX620 S3 with 1Gbit/s Ethernet I/O Module (PG-LND101) and BX620 S2 / BX620 S3 with 2Gbit/s FC I/O Module (PG-FCD102)
are not allowed to be mounted together on same BX600 S2 Blade Server System Unit (PGUR3SC1).
*. In case of using 10GBASE-SR connection of Switch Blade (PG-SW105), XFP Module (PG-XFPS01) is required.
GbE Pass-Thru Blade
Data Sheet
Type
Base Unit
CTO optional
LAN Interfaces
Internal
External
Dimensions (W x D x H (mm) )
*1. This is the type of GbE Pass-Thru Blade which is mounted on Network Blade Slot 1 of BX600 S2 Blade Server System Unit.
*2. This is the type of GbE Pass-Thru Blade which is mounted on Network Blade Slot 2 of BX600 S2 Blade Server System Unit.
When GbE Pass-Thru Blade (PGBLNB1011) is ordered, Switch Blade (PGBSW1040) or Switch Blade (PGBSW1050) or GbE Pass-Thru Blade(PGBLNB1010) should be ordered at a time.
*3. This is the type of GbE Pass-Thru Blade which is mounted on Network Blade Slot 3 of BX600 S2 Blade Server System Unit.
*4. This is the type of GbE Pass-Thru Blade which is mounted on Network Blade Slot 4 of BX600 S2 Blade Server System Unit.
When GbE Pass-Thru Blade (PGBLNB1013) is ordered, Switch Blade (PGBSW1042) or Switch Blade (PGBSW1052) or GbE Pass-Thru Blade(PGBLNB1012) should be ordered at a time.
*5. Connections between internal ports and external ports are one-to-one.
*. To connect to hub/router through GbE Pass-Thru Blade, it is necessary to connect to the port of 1000BASE-T(fixed).
In case that the port of 10/100BASE-TX is connected, communication cannot be established.
*. When GbE Pass-Thru Blade (PG-LNB101) are mounted on Network Blade Slot 3,4 of BX600 S2 Blade Server System Unit (PGUR3SC1),
the card on Expansion Board Slot of BX620 S2 / BX620 S3 should be 1Gbit/s Ethernet I/O Module(PG-LND101).
BX620 S2 / BX620 S3 with 1Gbit/s Ethernet I/O Module (PG-LND101) and BX620 S2 / BX620 S3 with 2Gbit/s FC I/O Module (PG-FCD102)
are not allowed to be mounted together on same BX600 S2 Blade Server System Unit (PGUR3SC1).
PG-SW104
10ports (1Gbps)
6ports (1000BASE-T / 100BASE-TX / 10BASE-T)
35 x 250 x 130
PGBLNB1010 (*1) / PGBLNB1011 (*2) / PGBLNB1012 (*3) / PGBLNB1013 (*4)
Switch Blade
PGBSW1050 (*1) / PGBSW1051 (*2) / PGBSW1052 (*3) / PGBSW1053 (*4)
6ports (1000BASE-T / 100BASE-TX / 10BASE-T),
1port (10GBASE-SR), 1port (10GBASE-CX4),
GbE Pass-Thru Blade
PG-LNB101
10ports (1Gbps) (*5)
10ports (1000BASE-T) (fixed) (*5)
35 x 250 x 130
PG-SW105
10ports (1Gbps)
35 x 250 x 130