Fujitsu PRIMERGY BX620 S5 Manual Opsi - Halaman 7

Jelajahi secara online atau unduh pdf Manual Opsi untuk Server Fujitsu PRIMERGY BX620 S5. Fujitsu PRIMERGY BX620 S5 50 halaman. Server blade

Introduction

Extensions and upgrades

1.3

Extensions and upgrades

Second processor

If only one processor is installed in your server blade, you can upgrade it to

include a second one. You may only use processors of the same type in the

server blade. The second processor must have the same clock frequency as the

first.

Upgrading the memory

The server blade offers 6 DDR3 DIMM slots per CPU (organized in 2 banks and

3 channels). All 12 main memory slots support RDIMMs (registered DIMMs)

and UDIMMs (unbuffered DIMMs). Only memory modules of the same capacity

can be installed on the same memory bank.

This allows a maximum memory configuration of 24 GB with UDIMMs (capac-

ities: 1 GB and 2 GB) and 96 GB with RDIMMs (capacities: 2 GB, 4 GB and

8 GB).

A combination of both module types is not allowed.

Optional I/O module

The server blade has one slot for an extension board (daughter card) which can

be used to provide two Fibre Channel connections or two additional Ethernet

connections. The following I/O modules are available:

– 4-Gbit Fibre Channel daughter card (PCIe)

– 1-Gbit Ethernet daughter card (PCIe)

– 10-Gbit Ethernet daughter card (PCIe)

To be able to use the additional I/O functionality, at least one FC I/O blade or an

Ethernet I/O blade must be installed in slots NET3 and/or NET4 of the BX600

S3 basic unit. For more information, see the operating manual for your basic

unit.

Storage modules

The hard disks are controlled by a storage module (controller) which can be

plugged into the motherboard and which may also have additional functions.

The following variants can be used: SAS, SAS/RAID and SAS/PCIe. The PCIe

variant allows the installation of low-profile modules.

Options Guide

BX620 S5