Fujitsu PRIMERGY CX122 S1 Panduan Pengoperasian - Halaman 42

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Server Fujitsu PRIMERGY CX122 S1. Fujitsu PRIMERGY CX122 S1 50 halaman.

Halaman Cetak
Front panel
5.2.1

Controls

On/Off button
When the system is switched off, it can be switched on again by
pressing the On/Off button.
When the system is operating, pressing the On/Off button will
switch off the system.
I
NMI
NMI button
V
RST
Reset button
Pressing the reset button reboots the system.
V
ID
ID button
Pressing the ID button toggles the ID indicator on the PRIMERGY
CX122 S1 operating panel.
42
The On/Off button does not isolate the device from the mains
voltage. To disconnect it completely from the PRIMERGY
CX1000 power distribution unit, loosen the two knurled
screws on the server front and slide the server out of the rack
about 10 centimeters.
CAUTION!
Do not press! Risk of loss of data! The NMI button may only
be used by service.
CAUTION!
Risk of loss of data!
Operating Manual
CX122 S1