Fujitsu PRIMERGY CX122 S1 Panduan Pengoperasian - Halaman 46

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Server Fujitsu PRIMERGY CX122 S1. Fujitsu PRIMERGY CX122 S1 50 halaman.

Configuring the server

When starting up a PRIMERGY CX122 S1 server node for the first time, there

are several installation options, depending on the system configuration:

– Hard disk drives installed - Preboot Execution Environment (PXE) boot

(recommended)

PXE boot requires your machine's BIOS to make a request of a TFTP server

for a bootable image (the equivalent of inserting a CD and booting). It is the

environment that allows devices to boot up via their network interface.

When shipping, the boot sequence of each PRIMERGY CX122 S1 server

has been configured to network booting. Right after the power on self test

process (POST), the system will execute the PXE bootstrap session, looking

for DHCP servers from the network. After selecting the required PXE boot

server, the bootstrapping process begins and the PXE firmware asks for the

exact path of the NBP (Network Bootstrap Program). After receiving this

path, the download process begins. This is done via the Trivial File Transfer

Protocol (TFTP, UDP, port 69).

Ê Dedicate one server from your network to be a PXE server with the

DHCP and TFTP services configured and running.

Ê Press the On/Off button (item 5 in figure

The PXE server will reply to your server's PXE boot request and aid the

client system during its bootstrap session.

Ê Follow the on-screen instructions.

10 on page

Operating Manual

41).

CX122 S1