Fujitsu Primergy RX100 S3 Panduan Suplemen Servis - Halaman 11
Jelajahi secara online atau unduh pdf Panduan Suplemen Servis untuk Server Fujitsu Primergy RX100 S3. Fujitsu Primergy RX100 S3 45 halaman.
Juga untuk Fujitsu Primergy RX100 S3: Mulai Manual (9 halaman)
Halaman Cetak
3
Safety notes
I
The following safety notes are also provided in the "Safety" manual.
This device complies with the relevant safety regulations for data processing
equipment.
V
CAUTION!
The actions described in these instructions should only be performed by
service personnel.
Before operating the device
V
CAUTION!
During installation and before operating the device, observe the
instructions on environmental conditions for your device.
If the device is brought in from a cold environment, condensation may
form both inside and on the outside of the machine.
Wait until the device has acclimatized to room temperature and is
absolutely dry before starting it up. Material damage may be caused
to the device if this requirement is not observed.
Transport the device only in the original packaging or in packaging
that protects it from knocks and jolts.
Installation and operation
V
CAUTION!
If the rack model is integrated in an installation that receives power
from an industrial (public) power supply network with the IEC309
connector, the (public) power supply protection must comply with the
requirements for the non-industrial (public) power supply networks for
the type A connector.
The server automatically sets itself to a voltage in the range of
100 V to 127 V respectively 200 V to 240 V. Make sure that your local
voltage is within this range.
RX100 S3
Service Supplement
11