Fujitsu PRIMERGY RX200 S3 Panduan Suplemen Servis - Halaman 9
Jelajahi secara online atau unduh pdf Panduan Suplemen Servis untuk Server Fujitsu PRIMERGY RX200 S3. Fujitsu PRIMERGY RX200 S3 49 halaman.
Juga untuk Fujitsu PRIMERGY RX200 S3: Mulai Manual (8 halaman)
Halaman Cetak
2
Procedure
V
CAUTION!
The actions described in this manual should only be performed by
engineers, service personnel or technical specialists.
Ê First of all please familiarize yourself with the safety instructions in the
chapter "Safety Instructions" on page
Ê Make sure that all required manuals (see Service-DVD) are available,
printing out the PDF files if necessary. You will definitely need:
– the Operating Manual for the server and
– the Options Guide for the server
– the Technical Manual for the system board.
Ê Shut down the server correctly, switch it off, pull out the power plug, and
open the server as described in the
page
17ff.
Ê Replace the defective component, as described in the relevant chapter.
Ê Close the server.
Ê Connect up the server cables.
Ê Connect the server to the mains.
Ê Start the operating system.
Ê If necessary, perform the relevant configuration.
1
These procedures are described in the Operating Manual.
RX200 S3
11f.
chapter "Replacing components" on
1
1
1
Service Supplement
1
9