Fujitsu PRIMERGY RX350 S7 Konfigurator Sistem dan Manual Informasi Pesanan - Halaman 7
Jelajahi secara online atau unduh pdf Konfigurator Sistem dan Manual Informasi Pesanan untuk Server Fujitsu PRIMERGY RX350 S7. Fujitsu PRIMERGY RX350 S7 36 halaman.
Halaman Cetak
Start PRIMERGY TX300 S7
I
Section
SAS - System unit, Rack and Floorstand including:
* By a key lockable front bezel in floorstand version
* Basic units with:
* 3 drive bays 5,25" for accessible drives free available.
* Integrated ServerView Diagnostics Technology with an modul for indication of failed
components via LED`s.
Simultaneously components are marked which can be replaced by the customer.
This LEDs can be dispalyed during service even without mains connection.
* Up to 4 hot plug power supply modules with 450W & 800W
* 4x 3.5" or 8x 2.5" HD backplane kits
* - Optional modular RAID 0/1 controllers with IME (Integrated Mirroring Enhanced) support
* One 0,5" bay can be configured with an optional LC- display for LocalView in a drawer
Systemboard D2649 with:
* Up to two Xeon 4C, 6C & 8C CPU`s (Socket-R)
with 2 serial QPI links ( Quick Path Interconnect ) and four memory channels per CPU
* Chipset Intel® C600 Series (codenamed Patsburg)
* 10 PCI slots:
* 24 memory slots for max. 768GB RAM DDR3 available
- Memory mirrroring is supported with 2 identical modules in channel A+B CPU 1 or D+E CPU 2
- Rank sparing mode is supported with min. 2x 1R/2R or 1x 4R modules for RDIMM or LRDIMM
* Dual Port 10/100/1000 x4 PCI Express* Gigabit Ethernet Intel LAN controller Powerville on-board
* iRMC S3 (integrated Remote Management Controller) on-board server management controller with
dedicated 10/100/1000 Service LAN-port and integrated graphics controller.
The Service LAN-port can be switched alternatively on standard Gbit LAN port 1
* Graphics Controller integrated in iRMC S3 (integrated Remote Management Controller):
Supported graphical resolutions are:
1920x1200x16bpp, 1920x1080x16bpp, 1600x1200x16bpp, 1680x1050x16bpp, 1440x900x16bpp,
1280x1024x32bpp, 1152x864x16bpp, 1024x768x32bpp, 800x600x32bpp, 640x480x32bpp
A
Basic units
- 4 Hot-Plug Power Supply Slots
- 4 Standard Fans (92mm; no redundancy)
- 12 memory DIMMs per CPU ( max 384GB ) => Total 24 DIMMs ( max 768GB ) for two CPU`s
- SAS/ SATA backplane with hot plug bays for 4x 3.5" HDD`s or 8x 2.5" HDD's & SSD's
Options:
based on LSI 1064 or LSI SAS2008 chipset or as alternative
- optional modular RAID 5 controller based on LSI SAS2108 chipset
First CPU has to be selected for an orderable basic unit,
@ first CPU
- 4x PCIe-3 x8 (one notched to install x16 cards)
@ first CPU
- 1x PCIe-3 x8 (for internal modular RAID controller only)
@ second CPU
- 2x PCIe-3 x16
@ second CPU
- 2x PCIe-3 x4
@ second CPU
- 1x PCIe-2 x4
- Memory is divided into 12 DIMMs per CPU ( 4 channels with 3 slots per channel )
Possible max. configurations are:
24x 32GB LRDIMM (quad rank modules) = 768GB
24x 16GB RDIMM (dual rank modules) = 384GB
16x 8GB UDIMM (dual rank modules) = 128GB
First Memory ( one module ) has to be selected for an orderable basic unit per CPU
- Memory upgrade is possible module wise
- SDDC (Chipkill) is supported for memory modules,
Fujitsu PRIMERGY Server
System configurator and order-information guide
PRIMERGY TX300 S7 / RX350 S7
Status 2014-01-30
7 of 36