Fujitsu PRIMERGY TX150 S6 Panduan Suplemen Servis - Halaman 32
Jelajahi secara online atau unduh pdf Panduan Suplemen Servis untuk Server Fujitsu PRIMERGY TX150 S6. Fujitsu PRIMERGY TX150 S6 45 halaman.
Juga untuk Fujitsu PRIMERGY TX150 S6: Catatan Tentang Penggunaan (8 halaman)
Halaman Cetak
Replacing the processor
Figure 15: Inserting a new processor
Ê Remove the protective cap from the bottom side of the new processor.
Ê Position the new processor over the socket and then carefully press it into
the socket (1).
V
CAUTION!
The processor can only be installed in one particular direction. Note
the marking on one of the corners. To avoid damaging the pins or the
processor, do not force it into the socket.
1
Figure 16: Fixing the processor
Ê Fold down the frame (1).
V
CAUTION!
The processor holder must fall down by itself. Do not close with force,
because soldering pads may be damaged.
Ê Press the lever slowly downward (2) until it is hooked in again (3).
32
1
2
Service Supplement
Replacement routines
a
3
TX150 S6