Fujitsu PRIMERGY TX200 S7 Konfigurator Sistem dan Manual Informasi Pesanan - Halaman 7

Jelajahi secara online atau unduh pdf Konfigurator Sistem dan Manual Informasi Pesanan untuk Server Fujitsu PRIMERGY TX200 S7. Fujitsu PRIMERGY TX200 S7 28 halaman. Dual socket intel xeon processor tower server
Juga untuk Fujitsu PRIMERGY TX200 S7: Lembar data (10 halaman)

Halaman Cetak

Start PRIMERGY TX200 S7

Section

Basic unit

System unit, Rack and Floorstand, including:

* Two lockable front covers in floorstand version

* backplane with 4 (LFF) or 8 (SFF) bays for hot-plug HD's. Type depending on base unit:

* PSU and Fan Type depending on base unit:

* 3 bays 5.25" for accessible drives (half Hight)

Systemboard D3099 with:

* Up to two Xeon 4C, 6C & 8C CPU`s (Socket-B2)

with 1 serial QPI link ( Quick Path Interconnect ) and 3 memory channels per CPU

First CPU has to be selected for an orderable basic unit,

* Chipset Intel® C600 Series (codenamed Patsburg)

* 6 PCI slots:

- No mix of registered and unbuffered modules is allowed

- First Memory ( one module ) has to be selected for an orderable basic unit per CPU

- Memory upgrade is possible module wise for the Independent Channel Mode or

for the Performance Mode,

- Memory mirrroring is supported with 2 identical modules in channel B+C CPU 1 or E+F CPU 2

- Hot Spare Memory is supported with 3 identical modules in channel A+B+C CPU 1 or D+E+F CPU 2

- SDDC (Chipkill) is supported only for registered memory modules,

* 6-port SATA controller on-board included in Intel Southbridge Patsburg A for SATA Raid0/1,

Max. 4 SATA / SAS HD`s are supported

Max. 2 SATA accessible drives are supported (DVD, Backup)

* 2x1 Gbit Ethernet LAN on board ( Intel Hartwell);

iSCSI boot integrated in System BIOS as selectable option

* iRMC S3 (integrated Remote Management Controller) on-board server management controller

with dedicated 10/100 Service LAN-port and

integrated graphics controller ( max. Resolution: 1600 x 1200 at 16 bpp)

The Service LAN-port can be switched alternatively on standard Gbit LAN port

Interfaces:

* 1x RS-232-C (serial, 9pin) (usable for BMC or OS or shared)

* 1x VGA (15 pin)

* 9x USB 2.0 (UHCI ) with 480MBit/s (4x external at the rear, 2x external at the frontside, 3x internal for backup or UFM)

* 2x LAN RJ45, 1x Service-LAN RJ45

*internal Cables:

1. SATA cable for CD/DVD.

2. Cable for HDD Backplane

3. USB cable (if USB Backup is used)

* ServerView Suite Software package incl. ServerStart, ServerBooks, Management Software and Updates

* Documentation engl. (multilingual on CD)

Door #1 for accessible drive bays

Door #2 for hot plug HDD bays

Both doors may be locked or door #1 may be left open while door #2 is still locked

Type 1: 4x hot plug LFF (3.5") SAS/SATA HDD (SAS/SATA LFF base units only)

Type 2: 8x (2x4) hot plug SFF (2.5") SAS HDD (SAS SFF base units only)

Type 1: standard PSU and standard Fans (3 System Fans)

(V101and V301, V501 and V701 base units)

Type 2: without PSU (450W or 800W must be added), but 1 additional fan for redundancy

(V201, V401, V601 and V801 base units)

for Type 1 base units there is an upgrade to

hot plug redundant PSU and redundant Fans available

- 2x PCIe-3 x16

- 2x PCIe-3 x4 (mechanically x8)

- 1x PCIe-2 x4 (mechanically x8)

- 1x PCI 32/33

optional Southbridge Patsburg B with 4 ports for SAS RAID 0/1

Fujitsu PRIMERGY Server

System configurator and order-information guide

PRIMERGY TX200 S7

Status 2014-01-30

7 of 28