Fujitsu SPARC Enterprise M3000 Catatan Produk - Halaman 14
Jelajahi secara online atau unduh pdf Catatan Produk untuk Server Fujitsu SPARC Enterprise M3000. Fujitsu SPARC Enterprise M3000 38 halaman.
Juga untuk Fujitsu SPARC Enterprise M3000: Panduan Memulai (8 halaman), Manual Keselamatan dan Kepatuhan (34 halaman), Catatan Produk (42 halaman)
Halaman Cetak
Patches for Emulex PCI Express (PCIe) Cards
The following Emulex cards require drivers supplied in patch 120222-26:
XSEFC402AF Sun StorageTek Enterprise Class 4Gb Dual-Port Fibre Channel PCI-
■
E HBA
XSEFC401AF Sun StorageTek Enterprise Class 4Gb Single-Port Fibre Channel
■
PCI-E HBA
Updating to XCP 1091
To update your XCP to XCP 1091, refer to the SPARC Enterprise
M3000/M4000/M5000/M8000/M9000 Servers XSCF User's Guide for instructions.
Resetting the XSCF Firmware
After updating the XCP firmware to 1091, do not fail to reset the XSCF by using the
rebootxscf(8) command.
Functionality Issues and Limitations
This section describes the known issues and limitations at the time of this release.
Notes on Active Directory
While Active Directory is enabled, when you attempt to login to XSCF via the
■
telnet, you might fail to login due to timeout of the query to secondary alternated
server or later.
If the specified timeout is too brief for the configuration, the login process or
■
retrieval of user privilege settings could fail. In such case, specify larger value for
the timeout and then try again.
6
SPARC Enterprise M3000 Server Product Notes for XCP Version 1091 • April 2010