Fujitsu SPARC Enterprise M3000 Catatan Produk - Halaman 17
Jelajahi secara online atau unduh pdf Catatan Produk untuk Server Fujitsu SPARC Enterprise M3000. Fujitsu SPARC Enterprise M3000 38 halaman.
Juga untuk Fujitsu SPARC Enterprise M3000: Panduan Memulai (8 halaman), Manual Keselamatan dan Kepatuhan (34 halaman), Catatan Produk (42 halaman)
Halaman Cetak
●
Change the stratum value of the NTP server
Of the NTP server which XSCF refers to, change the stratum value to "1." An NTP
server which has the stratum value of "1" becomes the most significant clock source
and has no refid. Therefore, there is no chance that it will have the same address as
the XSCF's own local clock.
When you change the stratum value of an NTP server, make sure in advance that it
has no impact on other NTP clients.
●
Change the address of the XSCF's own local clock
By using the setntp -m localaddr=value command, change the address of the
XSCF's own local clock. In value, specify the least significant byte of the clock
address of the local clock 127.127.1.x for value. A numeric from 0 to 3 can be
specified. By specifying either from 1 to 3, the address of an NTP server which is
referring to the local clock does not correspond to the address of the XSCF internal
local clock anymore, and a server which is referring to the local clock can also be set
as the NTP server of XSCF.
Notes on XSCF Web
Under the Windows 7
■
not support the use through the built-in Administrator account.
On Internet Explorer 8.0, when you move the on-screen horizontal frame up or
■
down to change the frame height and use the [Monitor Msg Show/Hide] button,
the screen background color may turn black. In this case, click Refresh on the
View menu or press F5 key to refresh the display, to go back to the screen right
after the login.
When you moved the on-screen horizontal frame up or down to change the frame
height, do not use the [Monitor Msg Show/Hide] button.
To use XSCF Web on the SPARC Enterprise M3000 server which is installed the
■
XCP 1080, disable the cache function of your browser. If you leave the browser
cache function enabled, the old cached data might be displayed. To disable the
cache funtion:
Internet Explorer 6 and 7
■
[Tools] -> [Internet Options...] -> [Advanced] tab and check the "Do not save
encrypted pages to disk" box.
Netscape 7.1 or later
■
[Edit] -> [Preferences] -> [Advanced] -> [Cache] -> [Compare the page in the
cache to the page on the network] setting and select the "Every time I view the
page" radio button.
2. Windows is either registered trademarks or trademarks of Microsoft Corporation in the United States
and/or other countries.
2
and Internet Explorer 8.0 environment, XSCF Web does
General Information About XCP 1091
9