Fujitsu teamserver M861i Panduan Konfigurasi - Halaman 29

Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Server Fujitsu teamserver M861i. Fujitsu teamserver M861i 32 halaman.

Halaman Cetak
Fujitsu teamserver M861i Panduan Konfigurasi
Product
Produt ID
Keyboard/Monitor Shelf Kit
GP5-R1TB3
Keyboard/Monitor Enhanced Switch GP5-SB101
Keyboard/Monitor Extension Cables
GP5-411
Enhanced Keyboard
GP5-R1KB2
Storage System (Ultrawide SCSI)
GP5UR1DC2
Storage System (Ultra2wide SCSI) GP5UR1DC3
Hard Disk Cabinet (Single End)
GP5MS621A
Additional Shelf
GP5MS621SA
SCSI Card
GP5U121
SCSI Card
GP5-123
SCSI Card
GP5-125
SCSI Card
GP5-126
RAID Card
GP5U141
RAID Card
GP5U142
RAID Card
GP5-143
RAID Card
GP5-144
SCSI Cable
GP5U831
SCSI Cable
GP5S-832
SCSI Cable
GP5-837
SCSI Cable
GP5-838
SCSI Cable
GP5MU823A
SCSI Cable
GP5MU829A
SCSI Cable
GP5MU830A
teamserver Hardware
Models
R R R R R R R R R R R R R
R R R R R R R R R R R R R
R R R R R R R R R R R R R
R R R R R R R R R R R R R
R R R R R R R R R R R R R
R R R R R R R R R
R R R R R R R
P P
P P P P P P P P P P P P P P P P
P P
P P P P P P P P P P P P P P P P
- - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - -
R R R
CRT/KB shelf for Rackmountable type *Only a 15''CRT can be installed on the CRT
storage table.
R R R
Switch enables sharing of a set of CRT,keyboard,and mouse by two or more servers
(up to four servers).
CRT/KB cable, CRT cable, KB/mouse cable is prepared separately.
R R R
CRT/KB cable , (CRT cablex1,KB cablex1 is attached)
R R R
87Key keyboard for Rackmountable type
R R R
8Hard Disk Drive Bays(Hotplugable)
Redundant HD/FAN(Two as a standard eqipment)/PSU(A GP5UR1PU1 is a standard
equipment, up to two) GP5-HDH45/HDH93/HDH81/ HDH94/HDH82 can be mounted.
Ultrawide SCSI
8Hard Disk Drive Bays(Hotplugable)
Redundant HD/FAN(Two as a standard eqipment)/PSU(A GP5UR1PU1 is a standard
equipment, up to two) GP5-HDH45/HDH93/HDH81/ HDH94/HDH82 can be mounted.
Ultra2wide SCSI
7Hard Disk Dirve Bays(Hotplugable)
14Bays is maximum (GP5MS621SA is used) Redundant HD/FAN(Up to
two)/PSU(GP5MSPU101A is standard equipment, up to two) GP5MHDH4GA/9GA
can be mounted. Ultrawide SCSI
Additional shelf only for GP5MS621A, Same as the basic shelf
Ultrawide, SE, x1ch, SMART not supported, Up to 40MB/s of syncronous transfer
support, Connector: half-pitch 68pin for external SCSI device, half-pitch 50/68pin for
internal SCSI device. To connect with GP5MS621A, GP5UR1DC2 or external SCSI
devices *SCSI cable is required
Ultrawide, differential-end, x1ch, SMART not supported, Up to 40MB/s of syncronous
transfer support, Connector:half-pitch 68pin for external SCSI device, half-pitch 50/68pin
for internal SCSI device For connection with Disk Array devices *SCSI cable is required
Ultrawide, SE, x1ch, SMART supported, Up to 40MB/s of syncronous transfer support,
Connector:half-pitch 68pin for external SCSI device, half-pitch 50/68pin for internal SCSI
device. For connection with internal and external SCSI devices *SCSI cable is required
Ultra2wide, LVD, x1ch, SMART supported, Up to 80MB/s of syncronous transfer support,
Connector:half-pitch 68pin for external SCSI divece, half-pitch 50/68pin for internal SCSI
device. For connection with internal and external SCSI devices *SCSI cable is required
RAID card, Ultrawide SCSI, SE, x2ch, 16MB cache, RAID level 0,1,5 are supported, For
internal/external array configuration *SCSI cable(for array configuration use)is reauired
RAID card, Ultrawide SCSI, SE, x2ch, 4MB cache, RAID level 0,1,5 are supported,
For internal array configuration *SCSI cable(for array configuration use)is required
RAID card, Ultrawide SCSI, x2ch, 8MB cache, RAID level 0,1,5 are supported, For
internal array configuration *SCSI cable(for array configuration use) is required
RAID card, Ultra2wide SCSI, LVD, x3ch, 32MB cache, RAID level 0,1,5 are
supported, For internal/external array configuration *SCSI cable(for array
configuration use) is required
Connection internal devices (0.7m) for C8xxi
For connection GP5-144 to GP5UR1DC3
Internal SCSI HDD connection(68pin) for C3xxi
Internal narrow SCSI cable for 5'' Bay (50pin) for C3xxi
SCSI-3(68pin)-SCSI-4(68pin), For connecting GP5U121/125 to GP5MS621A,
GP5UR1DC2 / GP5-126 to GP5UR1DC3(3.0m)
For connection between GP5U141 and GP5MS621A (2.0m)
For connection GP5U141 to GP5MS621A /GP5U141 to
GP5UR1DC2 (3.0m) A cable is required in 1ch
29
Remarks