Brother MFC-210C Panduan Pengaturan Cepat - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Pengaturan Cepat untuk Mesin Faks Brother MFC-210C. Brother MFC-210C 40 halaman. Facsimile equipment
Juga untuk Brother MFC-210C: Panduan Pengaturan Cepat (37 halaman), Panduan Pengaturan Cepat (37 halaman), Daftar Referensi Bagian (30 halaman)
![Brother MFC-210C Panduan Pengaturan Cepat](/uploads/products/server2/2433987/2433987.png)
Step 1
4
Take out the ink cartridge.
5
Carefully remove the bottom cap.
Opening
If the cartridge cover comes off when you
open the bag the cartridge will not be
damaged.
Keep the ink cartridge in an upright position
when you insert it into the slot.
OK
OK
OK
4
Setting Up the Machine
6
Press down on the ink cartridge until the
hook snaps over it, taking care to match the
slot colour (A) with the cartridge colour (B),
as shown in the diagram below.
(A)
OK
OK
OK
7
Lift the scanner cover to release the lock.
Gently push the scanner cover support
down and close the scanner cover.
If
shows on the LCD after you
Install
install the ink cartridges, check to make sure
the ink cartridges are installed correctly.
The machine will clean the ink tube system
for use for the first time. This process will
occur only once, the first time ink cartridges
are installed. The cleaning process will last
approximately four minutes.
The LCD shows:
Preparing System
Approx 4 Minutes
(B)