Brother MFC-297C Panduan Pengaturan Cepat - Halaman 14
Jelajahi secara online atau unduh pdf Panduan Pengaturan Cepat untuk Mesin Faks Brother MFC-297C. Brother MFC-297C 20 halaman. Brother mfc-250c: install guide
Juga untuk Brother MFC-297C: Panduan Pengaturan Cepat (22 halaman)
USB
For USB Interface Users (For Mac OS
12
Before you install
a
Make sure your machine is connected to the
power and your Macintosh
be logged on with Administrator rights.
Important
®
• For Mac OS
X 10.2.0 to 10.2.3 users,
upgrade to Mac OS
the latest information for Mac OS
http://solutions.brother.com/)
• Make sure there are no memory cards or a
USB Flash memory drive inserted.
13
Connect the USB cable
Important
• DO NOT connect the machine to a USB port
on a keyboard or a non-powered USB hub.
• Connect the machine directly to your
®
Macintosh
.
a
Using both hands, use the plastic tabs on both
sides of the machine to lift the scanner cover
until it locks securely into the open position.
14
®
is ON. You must
®
X 10.2.4 or greater. (For
®
X, visit
Macintosh
®
X 10.2.4 or greater)
b
Connect the USB cable to the USB socket
marked with a
USB socket inside the machine as shown
below.
c
Carefully guide the USB cable through the
trench as shown below, following the trench
around and toward the back of the machine.
Then connect the cable to your Macintosh
Important
Make sure that the cable does not restrict the
cover from closing, or an error may occur.
d
Lift the scanner cover to release the lock a.
Gently push the scanner cover support
down
and close the scanner cover c.
b
symbol. You will find the
®
1
3
2
®
.