Fujitsu C150-E194-01EN Panduan Operator - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Operator untuk Pemindai Fujitsu C150-E194-01EN. Fujitsu C150-E194-01EN 40 halaman. Image scanner

Component Name

Operator

Copy density

panel

dial

Function No.

display panel

Function button

Duplex button

Send to button

Scan button

Power lamp

Stacker

Note:

Pressing the Send to or Scan button initiates the application software. The mark is

displayed until the application software is ready. If the application software fails to get

ready and the function No. display is restored, the Send to or Scan processing is

canceled.

fi-4110CU Image Scanner Operator's Guide

Adjusts copy density (dark/light) in five stages.

Displays the Function No. or also displays the scanner

read mode as follows;

On: Single-side reading mode

Blink: Double-sided reading mode

Mark: An application is being activated

When the AC adapter is connected to the scanner or the

PC's power is turned on, the initialization of scanner is

executed. The display on the panel changes as follows;

P ® 0 ® 1 (When 1 appears, scanner becomes ready)

Selects a function to be started using this button.

This button's function is set using Launch.

Switches between read modes. You can confirm the

current read mode with the Function No. display panel.

Copies documents loaded in the document support.

Starts the operation specified by the Function button.

Scans the document placed in position.

Stays lit while power is being supplied.

Stacks the scanned documents.

Function

1-3