Fujitsu FI-4010CU Panduan Instalasi Cepat

Jelajahi secara online atau unduh pdf Panduan Instalasi Cepat untuk Pemindai Fujitsu FI-4010CU. Fujitsu FI-4010CU 2 halaman. Image scanner
Juga untuk Fujitsu FI-4010CU: Lembar Spesifikasi (2 halaman), Manual Prosedur Instalasi (7 halaman), Panduan Instalasi Cepat (2 halaman)

Halaman Cetak

Fujitsu FI-4010CU Panduan Instalasi Cepat

Quick Installation Guide

Refer to the "fi-4010CU Image Scanner Operator's Guide" when you would

like to know more about the scanner.

Refer to the "Scanner Utility for Microsoft ® Windows ® User's Guide" on the

Scanner driver (CD-ROM) when you would like to know more detailed

information about the FUJITSU TWAIN32 Scanner driver installation.

Check the scanner and accessories

Confirm that all of the following items are included.

Scanner

USB interface cable

(for EU)

ABBYY FineReader 6.0

User Manual

Adobe ® Acrobat ® 5.0

(CD-ROM)

Scanner driver (CD-ROM)

Release the Shipping Lock

Slide the Shipping Lock to

"Release" position.

Lock

Release

Attach the ADF paper chute and Document stopper

Attach the ADF paper chute A to the ADF unit so that the side guide

of the ADF paper chute faces up.

Attach the ADF paper chute B to the ADF paper chute A so that the

flip out of part of the ADF paper chute B faces up.

Insert the clows of the document stopper into the slots of the

scanner. Slide the document stopper in the direction of the arrow

marked on it to fix the stopper.

Carefully read the "fi-4010CU Image Scanner

Operator's Guide" before using this product.

Particularly read and understand the "Safety Precautions"

before using this product.

ADF paper chute B

AC cable

ADF paper chute A

fi-4010CU Quick

Installation Guide

fi-4010CU Image Scanner

AC adapter

Operator's Guide

Shipping Lock

Make sure to slide the shipping lock in place

(located on the bottom of the scanner) to

secure the internal carrier unit during

transportation.

After transporting and placing the scanner,

tilt the scanner (approx. 30 degrees) and

release the shipping lock.

ADF paper chute B

Flip out part

Connect the USB interface cable, ADF cable, and the AC cable

Confirm that the power of PC and the image scanner device is

Caution

turned off.

Connect the PC end of the USB interface cable to the PC.

Connect the scanner end of the USB interface cable to the scanner.

Connect the ADF cable to the ADF cable connector of the scanner,

and fix the thumb screws of the ADF cable connector.

Connect the AC adapter with the AC Cable, and then connect it to the

DC inlet on the Scanner.

Pad ASY

Insert the AC cable into the power outlet.

Next, install the FUJITSU TWAIN32 Scanner driver.

Document stopper

Install FUJITSU TWAIN32 Scanner driver

Install the mini-driver first, and then the TWAIN data source. If the old version of FUJITSU TWAIN32 Scanner driver has

been installed on your personal computer, refer to the "Scanner Utility for Microsoft ® Windows ® User's Guide" on the

Caution

Scanner driver (CD-ROM), and update the mini-driver.

The Windows ® XP screen samples are shown below. The

screen and operations will differ slightly depending on the

OS that is being used.

Preparation

Confirm that the Scanner is connected to your personal

computer with the USB interface cable.

Installing the mini-driver

Turn on the power by pushing the power switch in the back of

the scanner. The power lamp lights.

Turn on your personal computer and log on to Windows ® .

When using Windows ® 2000 or Windows ® XP log on as

an administrator . The "Found New Hardware Wizard" dialog

box is displayed.

Check "Install from a list or

specific location (Advanced)",

then click [Next].

Document stopper

For Windows ® Me check "Specify the location of the driver

(Advanced)", then click [Next].

For Windows ® 2000 and Windows ® 98, clicking on [Next]

the select search method screen is displayed.

• For Windows ® 98 select "Search for the best driver for

your devise (Recommended)" then click [Next].

• For Windows ® 2000 select "Search for a suitable driver

for my device (Recommended)" then click [Next].

ADF paper chute A

USB interface connector

USB interface cable

Windows ® 98, Windows ® Me, Windows ® 2000, Windows ® XP

Insert the Scanner driver (CD-ROM).

When automatic start has been set, the "SETUP

DISK START UP SCREEN" is displayed. To close

Caution

this screen, click the [Exit] button on this

screen.

Select "Search for the best

driver in these locations."

Check "Include this location

in the search:" then specify

D:\Driver2 (When your CD-

ROM is the D drive). After

that click [Next].

For Windows ® 98, just check "Specify a location:" then

specify D:\Driver2 (When your CD-ROM is the D drive).

After that click [Next].

For Windows ® Me, select "Find the most suitable driver

for the device being used" then click [Next]. Check

"Specify search location" then specify D:\Driver2 (When

your CD-ROM is the D drive). After that click [Next].

For Windows ® 2000, just check "Specify a location" and

then in the next screen specify "Copy manufacturer's files

from:" then specify D:\Driver2 (When your CD-ROM is the

D drive), then click [OK].

ADF cable connector

ADF cable

DC inlet

AC cable

Connect to your PC.

Connect to the power outlet.

Continued on next page

P3PC-E117-02EN