Brother MFC-5860CN Panduan Pengaturan Cepat - Halaman 10
Jelajahi secara online atau unduh pdf Panduan Pengaturan Cepat untuk Mesin Faks Brother MFC-5860CN. Brother MFC-5860CN 34 halaman. Mfc-5460cn; mfc-5860cn
Juga untuk Brother MFC-5860CN: Setup Manual (23 halaman), Panduan Pengaturan Cepat (34 halaman), Panduan Servis (9 halaman)
Halaman Cetak
STEP 1
Setting Up the Machine
Note
If you are sharing one phone line with an external
telephone answering machine, connect it as
shown below.
Set the receive mode to 'External TAD' if you
have an external answering machine. For
details, see Connecting an external TAD
(telephone answering device) in Chapter 7 of
the User's Guide.
5
Connecting the power cord
1
Connect the power cord.
Warning
• The machine must be fitted with an earthed plug.
• Since the machine is grounded through the power
outlet, you can protect yourself from potentially
hazardous electrical conditions on the telephone
network by keeping the power cord connected to
your machine when you connect it to a telephone
line. Similarly, you can protect yourself when you
want to move your machine by disconnecting the
telephone line first and then the power cord.
8
6
Installing the ink cartridges
Warning
If ink gets in your eyes, wash them out with water
at once, and if irritation occurs consult a doctor.
1
Make sure that the power is turned on.
The LCD shows:
No Cartridge
Open ink cartridge...
2
Open the ink cartridge cover (1).
3
Pull all the lock release levers down and
remove the yellow protective part (1).
Note
Do not throw away the yellow protective part. You
will need it if you transport the machine.
1
1