Fujitsu fi-4530C Memulai - Halaman 26

Jelajahi secara online atau unduh pdf Memulai untuk Pemindai Fujitsu fi-4530C. Fujitsu fi-4530C 27 halaman. Image scanner
Juga untuk Fujitsu fi-4530C: Manual Prosedur Instalasi (7 halaman), Manual Prosedur Instalasi (9 halaman), Brosur & Spesifikasi (2 halaman), Prosedur Instalasi (3 halaman), Petunjuk Penggantian dan Pembersihan Bahan Habis Pakai (14 halaman), Panduan Petunjuk Pembersihan (13 halaman), Petunjuk Pembersihan (2 halaman), Buku Petunjuk (10 halaman), Prosedur Instalasi (5 halaman)

Halaman Cetak

Appendix3

The glass of the inside of the

ARNI N G

ADF becomes hot during opera-

tion.

When you clean the inside of the

scanner, turn off the power and

unplug the AC adapter from the

outlet and wait for at least three

minutes.

Do not turn off the scanner when

you clean the Feed rollers or

Eject rollers.

■ Consumables and Replacement

Cycle

The following table shows the specifications of

consumables and guidelines for the replacement

cycle.

Description

Parts No.

Pad ASSY

PA03334-

0002

Pick roller

PA03334-

0001

For purchase of consumables, contact the store where

you purchased the scanner or an authorized FUJITSU

scanner service provider.

The replacement cycles above are rough guidelines for

the case of using A4/Letter woodfree or wood contain-

ing paper 64 g/m

(17 lb). This cycle varies according to

the type of the used paper and how frequently the scan-

ner is used and cleaned.

Use only the specified consumables.

ATTENTION

Do not use other consumables.

REPLACING CONSUMABLES

Standard

Replacement

Cycle

After 100,000 scans

or one year

After 200,000 sheets

or one year

fi-4530C Image Scanner Getting Started

Folowing illustration shows the locations of the parts to

be replaced. Refer to "Chapter 4 Replacing Consum-

ables" fi-4530C Operator's Guide on the Setup

CD-ROM.

■ Replacing the Pad ASSY

To remove

Pad ASSY

■ Replacing the Pick Roller

To attach

Sheet guide

Pick roller

AP-5