Fujitsu fi-4530C Petunjuk Penggantian dan Pembersihan Bahan Habis Pakai - Halaman 4

Jelajahi secara online atau unduh pdf Petunjuk Penggantian dan Pembersihan Bahan Habis Pakai untuk Pemindai Fujitsu fi-4530C. Fujitsu fi-4530C 14 halaman. Image scanner
Juga untuk Fujitsu fi-4530C: Memulai (27 halaman), Manual Prosedur Instalasi (7 halaman), Manual Prosedur Instalasi (9 halaman), Brosur & Spesifikasi (2 halaman), Prosedur Instalasi (3 halaman), Panduan Petunjuk Pembersihan (13 halaman), Petunjuk Pembersihan (2 halaman), Buku Petunjuk (10 halaman), Prosedur Instalasi (5 halaman)

Halaman Cetak
Fujitsu fi-4530C Petunjuk Penggantian dan Pembersihan Bahan Habis Pakai
fi-4530C & fi-5530C C
ONSUMABLE
4
R
C
EPLACEMENT AND
LEANING
R
P
A
EPLACING THE
AD
A defective or improperly installed Pad Assembly can cause misspicks,
skew, or double fed documents. To replace the Pad Assembly perform
the following steps.
•
Remove all documents from
the ADF Paper Chute. Open
the ADF by pressing the
ADF button.
•
Remove the Pad Assembly
by pressing on the top of the
pad assembly and sliding it
to the left to remove.
•
Attach the new Pad
Assembly by inserting the
claws in the holes on the
ADF, pressing on the top of
the pad assembly and
sliding it to the right to lock it
in place.
Note:
After replacement of any consumable reset the counter for that
consumable by following the instructions in your Operator's Guide.
These instructions can be found under the "Replacing
Consumables" section of the Operator's Guide.
I
NSTRUCTIONS
SSEMBLY
Open ADF
to Front
ADF button
Claws