Fujitsu fi-5000N Memulai - Halaman 24

Jelajahi secara online atau unduh pdf Memulai untuk Pemindai Fujitsu fi-5000N. Fujitsu fi-5000N 29 halaman. Fujitsu fi-5000n: user guide
Juga untuk Fujitsu fi-5000N: Spesifikasi Teknis (2 halaman)

Halaman Cetak
Fujitsu fi-5000N Memulai
Appendix1
Before you ask for repair service, check the following first.
Check also the fi-5000N Message Display if any error description is shown. To understand the error message and
required actions, refer to "fi-5000N Operator's Guide" for details.
If you cannot solve the problem by referring to these, contact the store where you purchased the fi-5000N, or contact an
authorized FUJITSU scanner service provider.
Symptom
fi-5000N cannot be turned
on. (Power lamp (LED) is
not lighted)
Nothing is displayed on the
Message Display
The fi-5000N's keyboard
does not respond when the
keys are pressed
AP-1
Troubleshooting
Check this item
Is the power switch turned on?
Are the AC adapter and the power
cable of fi-5000N connected
correctly?
Turn off the power, and
disconnect the USB cable. Is the
power restored when you turn on the
power again?
Turn off the power, and
disconnect the network cable. Is the
power restored when you turn on the
power again?
The power lamp (LED) could be
damaged If any of the following is
observed:
Is the lamp on the network connector
blinking (orange)?
Do messages appear on the
Message Display?
Can the problematic fi-5000N be
seen from the fi-5000N software?
Is the power lamp of fi-5000N lighted
up?
Turn off the power of fi-5000N, and
disconnect the USB cable. Does the
problem prevail even after you turn
on the power again?
Turn off the power of fi-5000N, and
disconnect the network cable. Does
the problem prevail even after you
turn on the power again?
Are the power lamp of fi-5000N
lighted, and messages displayed on
the Message Display?
Remedy
Turn on the power switch.
Re-connect the AC adapter and the
power cable correctly.
Check whether there is a problem
with the USB cable or the power
cable.
Check whether there is a problem
with the network cable or the network
(such as hub, router).
Turn on the power again.
Turn off the power switch. Check that
the AC adapter and the power cable
are connected, and then turn on the
power.
Check whether there is a problem
with the USB cable or the power
cable.
Check whether there is a problem
with the network cable or the network
(such as hub, router).
Turn off the power switch. Check that
the AC adapter and the power cable
are connected, and then turn on the
power.