Fujitsu FI-5015C Memulai - Halaman 23
Jelajahi secara online atau unduh pdf Memulai untuk Pemindai Fujitsu FI-5015C. Fujitsu FI-5015C 24 halaman. Image scanner
Juga untuk Fujitsu FI-5015C: Memulai (26 halaman), Brosur & Spesifikasi (2 halaman), Instruksi Penggantian dan Pembersihan Bahan Habis Pakai Instruksi Penggantian dan Pembersihan Bahan Habis Pakai (10 halaman)
Halaman Cetak
Appendix3
During its operation, the inside
ARNI N G
glass of the ADF becomes very
hot .
Before replacing the
consumables, turn its power off
and unplug the AC adapter from
the outlet. Wait at least
15 minutes.
■ Consumables and Replacement
Cycle
The followings are the specifications of consumables
and their recommended replacement cycles.
Description
Parts No.
Pad ASSY
PA03209-
0550
Pick roller unit
PA03209-
0551
To purchase consumables, contact the store where you
purchased the scanner or an authorized FUJITSU scanner
service provider.
The replacement cycles above are rough guidelines
when using the following type of paper:
Woodfree paper or Plain paper.
This cycle varies according to the type of the used paper
and how frequently the scanner is used and cleaned.
Use only the specified consumables.
ATTENTION
REPLACING CONSUMABLES
Standard
Replacement Cycle
After 20,000 scans or
one year
After 100,000 scans or
one year
The following illustrations show the locations of the
consumables. Refer to "Chapter 4 Replacing Consum-
ables" fi-5015C Operator's Guide on the Setup
DVD-ROM.
■ Replacing the Pad ASSY
■ Replacing the Pick Roller unit
AP-5
Pad ASSY