Fujitsu fi-5120C Memulai - Halaman 13

Jelajahi secara online atau unduh pdf Memulai untuk Pemindai Fujitsu fi-5120C. Fujitsu fi-5120C 28 halaman. Cleaning and consumable replacement instructions
Juga untuk Fujitsu fi-5120C: Manual Prosedur Instalasi (7 halaman), Manual Prosedur Instalasi (9 halaman), Spesifikasi (2 halaman), Panduan Memulai (29 halaman), Buku Petunjuk (13 halaman)

Halaman Cetak

The factory default setting for SCSI ID is

"5". If the SCSI ID of another SCSI device is

HINT

set to the same ID, change either the scan-

ner's SCSI ID or SCSI ID of the other SCSI

device. Set the SCSI ID using the SCSI ID

switch on the back of the scanner.

Click

2.3 Installing the Scanner

Application

For scanning documents with this scanner, both scanner

driver and image capturing application software (called

"application" hereafter) must be installed on your PC.

The following scanner drivers and applications are pro-

vided:

• Scanner Driver:

FUJITSU TWAIN 32 Scanner Driver

FUJITSU ISIS Scanner Driver

• Scanning application:

ScandAll 21 (for FUJITSU TWAIN 32)

QuickScan Pro

Install the appropiate scanner driver for the application

you will use. The following sections descri be installa-

tion of each driver and application.

For FUJITSU TWAIN32 Scanner Driver

■ Preparation

Confirm the following items before installing the appli-

cation.

• Take out the Setup CD-ROM from its pack-

age, but do not insert the Setup CD-ROM

into the CD driver yet.

• Connect the scanner correctly to your PC.

For details on how to connect the scanner,

refer to "2.2 Connecting the Scanner to

HINT

Your PC" on page 4.

• Uninstall any older versions of FUJITSU

TWAIN 32 driver if already installed.

(for FUJITSU ISIS)

fi-5120C/fi-5220C Image Scanner Getting Started

Uninstall [Scanner Utility for Microsoft Win-

ATTENTION

dows] from [Add/Remove Programs] of the

control panel.

• There are two types of FUJITSU TWAIN 32:

One of the following driver software will be

installed automatically according to your Oper-

ating System (OS).

For Windows 98, Windows Me, Windows

2000, and Windows XP:

FUJITSU TWAIN32 V9

For Windows 95, Windows NT 4.0:

FUJITSU TWAIN32 V8

ASPI Manager V4.01 or later is required

(generally comes with SCSI board products).

■ Installing the FUJITSU TWAIN32

Scanner Driver

Windows XP screenshots are used in this sec-

tion as examples. The windows and opera-

HINT

tions may slightly vary, if your OS is other than

Windows XP.

1. Press the power button to turn on the scanner.

2. Turn on your PC and log on to Windows.

When using Windows NT 4.0, Windows

ATTENTION

2000 or Windows XP, log on as a user with

"Administrator" privileges (privileges of the

administrator of your PC).

3. If the scanner is automatically detected,

[Found New Hardware Wizard] or [Add/

Remove Hardware Wizard] dialog box will

appear. Click [Cancel] to close the Wizard win-

dow.