Fujitsu fi-6110 Panduan Memulai - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Memulai untuk Pemindai Fujitsu fi-6110. Fujitsu fi-6110 9 halaman. Image scanner
Juga untuk Fujitsu fi-6110: Panduan Memulai (9 halaman)

Halaman Cetak

Checking the Components

Make sure that all items shown below are included in the package. If any other packaging is provided, make
sure to store it as well. Make sure to handle the components with care.
The box and packaging materials are required for storage and transportation of the scanner. Do not throw
them away. If anything is missing or damaged, contact your FUJITSU scanner dealer or an authorized
FUJITSU scanner service provider.
Scanner (× 1)
Safety Precautions (× 1)
Note: The contents may vary depending on the country.

Safety Precautions

The provided "Safety Precautions" document
contains important information about the safe use
of the scanner. Before using the scanner, make
sure to read and understand the information
provided in the "Safety Precautions" document.
Symbols Used in This
Manual
The following symbols are used in this manual.
Symbol
This symbol alerts operators to an
operation that, if not strictly
WARNING
observed, may result in severe
injury or death.
This symbol alerts operators to an
operation that, if not strictly
observed, may result in safety
CAUTION
hazards to personnel or damage
to equipment.
ADF Paper Chute
AC Cable (× 1)
(× 1)
Setup DVD-ROM (× 1)
Description
AC Adapter (× 1)
Carrier Sheet (× 1)
This symbol alerts particularly
important information. Be sure to
read this information.
This symbol alerts operators to
helpful advice regarding
operation.
Removing the Protective
Packaging
The scanner comes in a variety of protective
packaging. Follow the procedure described below
to remove the packaging before using the
scanner.
1.
Open the stacker, and peel off the tape to
remove the protective foam sheet from the
ADF.
ADF
Stacker
2
USB Cable (× 1)
Protective
Foam Sheet
and Tape