Fujitsu FI-6130 Panduan Memulai - Halaman 12
Jelajahi secara online atau unduh pdf Panduan Memulai untuk Pemindai Fujitsu FI-6130. Fujitsu FI-6130 20 halaman. Color duplex workgroup scanners
Juga untuk Fujitsu FI-6130: Brosur & Spesifikasi (2 halaman), Buku Petunjuk (10 halaman), Memulai (23 halaman), Pembersihan dan Pemeliharaan (47 halaman), Petunjuk Pembersihan (2 halaman)
Halaman Cetak
9.
When you see the [InstallShield Wiizard Complete]
dialog box, click the [Finish] button.
Your computer will restart and detect the scanner. Do not
remove the Setup CD-ROM from the CD drive until your
computer completely starts up again.
ATTENTION
Depending on the operating system you are using, you
may need to do the following.
Windows 2000:
If you see the [Digital Signature not Found] dialog box, click
[Yes].
Windows Vista:
If you see the [Found New Hardware] dialog box, select
[Locate and install driver software], and then in the [User
Account Control] dialog box, click the [Continue] button, if it
is displayed.
The installation of FUJITSU ISIS is complete.
Next, install ScandAll PRO (
ATTENTION
To make sure that FUJITSU ISIS is successfully installed,
perform a scan with a ISIS-compliant application such as
ScandAll PRO. For information about how to scan with
ScandAll PRO, refer to section "2.4 Checking Scanner
Driver Operation" on page 9.
ScandAll PRO
ScandAll PRO is software for scanning images, which is in
compliance with both TWAN/ISIS standards. Using
FUJITSU TWAIN 32 or FUJITSU ISIS together with
ScandAll PRO allows you to create document images.
ATTENTION
Be sure to log on as a user with "Administrator" privileges.
1.
Insert the Setup CD-ROM into the CD drive.
⇒
<SETUP DISK START UP SCREEN> appears.
2.
Click [INSTALL PRODUCTS], and then click
[ScandAll PRO].
3.
Select a language for the installation on [Choose
Setup Language] dialog box, and then click the [OK]
button.
4.
Proceed with the installation, following the on-
screen instructions.
5.
When the [InstallShield Wizard Complete] dialog
box appears, click the [Finish] button.
HINT
For information about the features of ScandAll PRO, refer to
Help topics in ScandAll PRO.
7
page 7).
Error Recovery Guide
If Error Recovery Guide is installed on your computer, you
can troubleshoot errors that may occur in the scanner by
simply following the on-screen instructions.
If you did not install Error Recovery Guide together with the
scanner driver, follow the procedure below to install it.
1.
Insert the Setup CD-ROM into the CD drive.
⇒
<SETUP DISK STARTUP SCREEN> appears.
2.
Click [INSTALL PRODUCTS], and then click [Error
Recovery Guide].
3.
Select a language for the installation in the [Choose
Setup Language] dialog box, and then click the
[Next] button.
4.
Install the application, following the on-screen
instructions.
5.
When you see the [InstallShield Wizard Complete]
dialog box, click the [Finish] button.
Image Processing Software Option (Trial)
For details on the installation of Image Processing Software
Option (Trial Version), refer to the "Image Processing
Software Option User's Guide."
QuickScan Pro™ (Trial)
QuickScan Pro™ is image capturing software based on the
ISIS standard. By using this software together with FUJITSU
ISIS, you can scan documents with the scanner. Follow the
procedure below to install the trial version of QuickScan
Pro™ that comes with this scanner.
ATTENTION
Be sure to log on as a user with "Administrator" privileges.
1.
Insert the Setup CD-ROM into a CD drive.
⇒
<SETUP DISK STARTUP SCREEN> appears.
2.
Click [INSTALL PRODUCTS], and then click
[QuickScan Pro (Trial)].
3.
In the [Welcome to the InstallShield Wizard for
QuickScan 4.5] dialog box, click the [Next] button.