Fujitsu fi-6670 Series Panduan Memulai - Halaman 14

Jelajahi secara online atau unduh pdf Panduan Memulai untuk Pemindai Fujitsu fi-6670 Series. Fujitsu fi-6670 Series 26 halaman. Image scanner
Juga untuk Fujitsu fi-6670 Series: Panduan Pengguna (26 halaman), Manual Prosedur Instalasi (6 halaman), Brosur (2 halaman), Spesifikasi (2 halaman), Panduan Memulai (14 halaman), Petunjuk Penggantian dan Pembersihan Bahan Habis Pakai (22 halaman)

3) Gently close the Document Cover.

4) Change the position of the ADF.

AUTION

The ADF can be set to any of the following three positions:

After repositioning the ADF, be sure that the ADF is firmly locked to the new position.

■

Traditional (Factory default)

■

Standard (Space-saving type and for right-handed

operators)

Slide the ADF toward the center of the scanner.

Note the following explanation in this manual is based upon

this standard type of the scanner.

■

Reversed (Space-saving type and for left-handed

operators)

Slide the ADF toward the center of the scanner, and then

rotate it counterclockwise by 180 degree.

Attach the Stacker and the ADF Paper Chute to the scanner.

1) Insert the hooks of the ADF Paper Chute into their corresponding holes on the scanner.

2) Fit the protruding sections of the Stacker into their corresponding slots on the scanner.

Protruding section

• Be careful not to pinch your fingers when moving the ADF.

• Never rotate the ADF by more than 180 degree. Doing so may damage the ADF.

Hook