Fujitsu FI-6770A - Clr Dupl 70PPM/140IPM Ultra SCSI A3 Twain Panduan Pengguna - Halaman 24
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pemindai Fujitsu FI-6770A - Clr Dupl 70PPM/140IPM Ultra SCSI A3 Twain. Fujitsu FI-6770A - Clr Dupl 70PPM/140IPM Ultra SCSI A3 Twain 26 halaman. Windows 95\98\98se\me\2000\xp\vista
Juga untuk Fujitsu FI-6770A - Clr Dupl 70PPM/140IPM Ultra SCSI A3 Twain: Manual Prosedur Instalasi (6 halaman), Petunjuk Penggantian dan Pembersihan Bahan Habis Pakai (22 halaman)
Halaman Cetak
10
Select the [Scan] menu
The [Scan Settings] dialog box appears.
11
Clear the [Save to file] checkbox.
12
Click the [Scanner Setting] button.
The scanner driver's setting dialog box appears.
13
Configure scanner settings such as the resolution and paper size.
■
FUJITSU TWAIN 32 scanner driver
Configure scan settings, and then click the [OK]
button.
■
FUJITSU ISIS scanner driver
Configure scan settings, and then click the [OK]
button.
24
If "Kofax VRS Scanner" does not appear in the list, check if the interface cable is properly connected
to SCSI/USB Connector 2.
If "Kofax VRS Scanner" does not appear even after you have connected the cable properly, then refer
to "Chapter 8 Troubleshooting" in the Operator's Guide.
[Scan Settings].
You only check the operation now, so you do not have to
save to file.
The setting dialog box of the scanner driver
may be displayed again after the [OK] button
is clicked. In such case, click the [Scan]
button in the dialog box.