Fujitsu fi-7300NX Petunjuk Penggantian dan Pembersihan Bahan Habis Pakai - Halaman 21
Jelajahi secara online atau unduh pdf Petunjuk Penggantian dan Pembersihan Bahan Habis Pakai untuk Pemindai Fujitsu fi-7300NX. Fujitsu fi-7300NX 27 halaman. Image scanner
Juga untuk Fujitsu fi-7300NX: Memulai (2 halaman)
Halaman Cetak
6.
Remove the pick rollers (x 2) one by one from the shaft.
a.
Pull out the pick roller from the shaft as you lift the retaining clip.
b.
Pull out the other pick roller from the shaft as you lift the retaining clip.
7.
Attach new pick rollers (x 2) on the shaft one by one.
a.
Insert the retaining clip of the pick roller into the slot.
b.
Insert the retaining clip of the other pick roller into the slot.
ATTENTION
Confirm that the pick rollers are attached properly. Otherwise, paper jams or other feeding errors may occur.
Make sure you insert the pick rollers until they lock in place.