Fujitsu fi-7300NX Petunjuk Penggantian dan Pembersihan Bahan Habis Pakai - Halaman 5
Jelajahi secara online atau unduh pdf Petunjuk Penggantian dan Pembersihan Bahan Habis Pakai untuk Pemindai Fujitsu fi-7300NX. Fujitsu fi-7300NX 27 halaman. Image scanner
Juga untuk Fujitsu fi-7300NX: Memulai (2 halaman)
Halaman Cetak
Cleaning the Inside of the Scanner (ADF) with Cleaning Paper
The Inside of the ADF can be cleaned with a sheet of Cleaning Paper moistened with Cleaner F1.
As the scanner continues to feed the documents, paper dust will accumulate Inside the ADF and it may cause scanning
errors. Cleaning should be performed approximately every 5,000 sheets scanned. Note that this guideline varies
depending on the types of documents you scan. For Instance, It may be necessary to clean the scanner more frequently
when you scan documents on which the toner is not sufficiently fused.
ATTENTION
Do not use water or mild detergent to clean the ADF.
It may take a long time to dry if an excessive amount of Cleaner F1 is used. Use only a small amount.
1.
Turn on the scanner.
2.
On the touch screen, press
The [Cleaning Paper] screen is displayed.
ATTENTION
Do not start scanning with an Image scanning application during cleaning.
3.
Spray the Cleaning Paper with Cleaner F1.
4.
Pull out the chute extension according to the length of the Cleaning Paper.
5.
Adjust the stacker according to the length of the Cleaning Paper.
6.
Load the Cleaning Paper in the ADF paper chute (Feeder).
-> [Cleaning & Maintenance] -> [Cleaning] -> [Cleaning Paper].