Fujitsu fi-8170 Panduan Operator - Halaman 37
Jelajahi secara online atau unduh pdf Panduan Operator untuk Pemindai Fujitsu fi-8170. Fujitsu fi-8170 47 halaman. Image scanner
Juga untuk Fujitsu fi-8170: Memulai (2 halaman), Memulai (2 halaman)
Halaman Cetak
Cleaning the Rollers
When ink or paper dust is stuck on the imprinter feed roller surfaces, documents may not feed smoothly.
To prevent feed problems, clean the roller surfaces regularly.
ATTENTION
It may take a long time to dry if an excessive amount of Cleaner F1 is used.
Use it in small quantity.
Wipe off the cleaner completely to leave no residue on the cleaned parts.
HINT
The recommended cleaning cycle is every 5,000 sheets.
The actual cleaning cycle may be shorter depending on how often the imprinter is used and the documents.
1
Open the print section (imprinter cover).
2
Clean the rubber rollers.
Clean the rubber rollers (six in total) under the feeding section.
37
Daily Care