Fujitsu M3093EX Panduan Operator - Halaman 26

Jelajahi secara online atau unduh pdf Panduan Operator untuk Pemindai Fujitsu M3093EX. Fujitsu M3093EX 50 halaman. Departmental document scanner
Juga untuk Fujitsu M3093EX: Brosur (2 halaman), Prosedur Instalasi (3 halaman), Brosur & Spesifikasi (2 halaman), Panduan Petunjuk Pembersihan (12 halaman)

Halaman Cetak

Pull up the ADF paper chute as follows:

• Hold the document cover with one hand and pull up the ADF

paper chute with the other hand until it clicks.

ADF paper chute

Shaft

Figure 4.3 ADF paper chute setting

Fan the documents as follows:

• Take a 15 to 20 mm thickness of documents. Lightly hold both

ends with both hands. Bend the documents into an arch as

shown below.

• Then hold the documents tightly with both hands, and

straighten the documents. The center of documents swell and

air is introduced between the documents.

• Repeat this operation two or three times.

• Turn the documents 90°, and repeat the operation again.

15 to 20 mm

Document cover

Push for storage

Document cover

4 – 7