Fujitsu M3093GX Panduan Petunjuk Pembersihan - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pembersihan untuk Pemindai Fujitsu M3093GX. Fujitsu M3093GX 12 halaman. Departmental document scanner
Juga untuk Fujitsu M3093GX: Panduan Operator (50 halaman), Manual Prosedur Instalasi (7 halaman), Manual Prosedur Instalasi (9 halaman), Brosur & Spesifikasi (2 halaman), Prosedur Instalasi (5 halaman)
Halaman Cetak
M3093EX/GX/DE/DG
r
P
a
ePlaCinG the
aD
Pad
Pick
Spring
Correct
Pad Assy
S
P
anD
can
artnEr
(
.)
ssembly
Cont
Note:
The Pad Assembly consists of
the Pad, the Pick Spring, and
the Pad Holder.
Pad Holder
•
If you receive only the
rubber pad, replace the Pad
according to the following
procedure.
•
•
•
Incorrect
•
•
Insert the new Pad Assembly
ADF Frame
into the bigger side of the
mounting holes in the ADF
frame, and then slide to the
right until it locks into place.
•
Close the ADF.
93GX c
r
onSuMablE
EPlacEMEnt anD
Remove the Pick Spring.
Remove the Pad from
the Pad Holder.
Align the holes in the
new Pad with the pins on
the Pad Holder.
Attach the Pick Spring so
that both ends of the Pick
Spring are located on the
Pad.
c
i
lEaninG
nStructionS