Fujitsu M3096EX Petunjuk Penggantian dan Pembersihan Bahan Habis Pakai - Halaman 5
Jelajahi secara online atau unduh pdf Petunjuk Penggantian dan Pembersihan Bahan Habis Pakai untuk Pemindai Fujitsu M3096EX. Fujitsu M3096EX 12 halaman. Departmental document scanners
Juga untuk Fujitsu M3096EX: Brosur (2 halaman), Prosedur Instalasi (3 halaman), Brosur & Spesifikasi (2 halaman)
Halaman Cetak
R
p
a
eplaCinG the
ad
Pad
Pick
Spring
Correct
Pad Assy
M3096EX/GX C
(
.)
ssembly
Cont
Note:
The Pad Assembly consists of
the Pad, the Pick Spring, and
the Pad Holder.
Pad Holder
•
If you receive only the
rubber pad, replace the Pad
according to the following
procedure.
•
•
•
Incorrect
•
ADF Frame
•
Insert the new Pad Assembly
into the bigger side of the
mounting holes in the ADF
frame, and then slide to the
right until it locks into place.
•
Close the ADF.
R
onsuMablE
EplaCEMEnt and
Remove the Pick Spring.
Remove the Pad from
the Pad Holder.
Align the holes in the
new Pad with the pins on
the Pad Holder.
Attach the Pick Spring so
that both ends of the Pick
Spring are located on the
Pad.
C
i
lEaninG
nstRuCtions