Fujitsu M3096F+ Panduan Operator - Halaman 30

Jelajahi secara online atau unduh pdf Panduan Operator untuk Pemindai Fujitsu M3096F+. Fujitsu M3096F+ 45 halaman. Image scanner

Halaman Cetak

Table 4.2

Indicator

names and functions

Indicator

name

Power lamp

Alarm lamp

Jam lamp

Ready lamp

Resolution

lamp

Line/Photo

lamp

Half-tone

lamp

Density lam] P

Lamp color

Amber

Red

Green

Function

Lights when power is applied.

Lights when a device failure occurs. If this lamp lights,

urn the power off then on again. Then execute reading.

Lights when a jam occurs in the auto feed mode. If this

lamp lights, remove jammed paper and turn off this lamp

,y pushing the Stop switch. Then start reading.

Lights when the image scanner becomes ready in the mode

where reading is started with the Start switch (i.e. manual

start mode) and goes out when the Start switch is pressed

snd reading is started.

The lamp corresponding

to the selected resolution

lights

each time the Resolution

switch is pressed.

When the

main unit specifies a resolution

the image scanner

zomplies accordingly.

I'he read processing

lamp corresponding

to the setting of

the Document switch lights.

Line:

Compensate

the reflection

of the background

of the

document.

Photo:

Scanner memorizes

the white target of it as the

white level.

When power is applied and the initial state is specified,

Line is selected.

When the host computer

has specified the

document, the scanner complies accordingly.

When half-tone reading has been selected with the Half-

tone switch (dither processing),

this lamp lights.

When the

Automatic Separation

text and photo reading has been

selected with Half-tone

switch, this lamp blinks.

This

lamp is not lit after powered on without IPC option. This

lamp blinks after powerd on with IPC option. When the

host computer

specifies Half-tone,

the scanner complies

accordingly.

Each time the Density switch is pressed, the Density lamp

lights.

Dark output (for light document image):

Select the Dark lamp.

Light output (for dark document image):

Select the Light lamp.

When power is applied or the initial state is specified, the

Normal lamp lights. If the DTC option is installed,

the

Auto lamp lights when power is applied.

When the host

computer

specifies density, the scanner complies

accordingly.

4-4

50FH5020E-01