Fujitsu M3097G Plus Prosedur Instalasi - Halaman 3

Jelajahi secara online atau unduh pdf Prosedur Instalasi untuk Pemindai Fujitsu M3097G Plus. Fujitsu M3097G Plus 5 halaman. Scsi scanner installation procedures for windows nt 4.0
Juga untuk Fujitsu M3097G Plus: Manual Prosedur Instalasi (7 halaman), Manual Prosedur Instalasi (9 halaman)

Fujitsu M3097G Plus Prosedur Instalasi
M3093GX\DG\M3096G\GX\M3097G+\DG
Fi-4340C\Fi-4530C\Fi-4640S\M4097D\Fi-4750C\L\Fi-5750 SCSI
Connecting SCSI cable: Located on the back of the scanner are the SCSI ports.
Depending on the model the ports may be either a High Density 50-pin (HD-50) or a 50-
pin Centronics. Use the appropriate cable to connect the scanner to the SCSI controller
in your PC. Ensure all connections are securely fastened.
Powering On: Connect the power cord to the scanner and a wall outlet then turn on the
scanner. For those models without a power switch plug in the power supply to the back
of the scanner. For proper communication between the Scanner and the Workstation,
switch on the scanner prior to switching on the workstation. The scanner power and
LCD display will light up. Next after the scanner completes its startup initialization the
LCD will display either ready or the number one. This indicates that the scanner is
ready.
Step F: Installing the ISIS driver.
1. Create a new folder and name it ISIS Download.
2. Next go to our Web page -
3. In the sub frame under the Product Support column click on Scanners.
4. On the next page select Drivers and Downloads.
5. Afterwards click on ISIS Software Drivers.
6. Locate the appropriate ISIS driver for your scanner by cross-referencing the scanner
model column on the left to the software column.
7. Double click on the driver file name and the File Download box will popup.
8. Click on Save and then use the browse (or other folder navigation) button until you
have the ISIS Download folder you created in the Save In Box.
9. Click Save.
10. When completed close the Download Complete window and go to the ISIS
Download folder.
11. Open the folder and you will see the saved ISIS driver file. Double click on the file to
unzip it and the WinZip* self-extractor box will popup. Click on browse and select the
ISIS Download folder, then click on Extract. The file will begin to unzip and when
finished a message box will report the number of files unzipped. Click on OK and
close WinZip.
Win95\98\ME Installation Procedure
www.fcpa.com
and click on Support & Downloads.
Rev052104A