Brother Business Smart MFC-J4510dw Panduan Pengaturan Cepat - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengaturan Cepat untuk Server Cetak Brother Business Smart MFC-J4510dw. Brother Business Smart MFC-J4510dw 47 halaman. Quick setup guide - spanish
Juga untuk Brother Business Smart MFC-J4510dw: Manual (36 halaman), Manual (22 halaman), Panduan Keamanan Produk (17 halaman), Manual (13 halaman), Manual (22 halaman), Panduan Pengaturan Cepat (47 halaman), Manual (18 halaman), Panduan Pengaturan Cepat (47 halaman), Brosur & Spesifikasi (4 halaman), Panduan Keamanan Produk (20 halaman), Spesifikasi (2 halaman), Panduan Memulai Cepat (29 halaman), Panduan Keamanan Produk (25 halaman), (Spanyol) Panduan Guia De Web Connect (38 halaman), Manual (Spanyol) (24 halaman), (Bahasa Inggris) Panduan Panduan Keamanan Produk (16 halaman), Manual (Spanyol) (11 halaman), (Bahasa Inggris) Panduan Konfigurasi Cepat (47 halaman)

Set your country

(Australia and New

Zealand only)

You must set your country so that the machine works

correctly on local telecommunication lines in each

country.

Check that the power is turned on by

connecting in the power cord.

Press your country (Australia or

New Zealand).

Press OK.

If the LCD shows the correct country, press

Yes, and then go to step d. Or press No, and

then go back to step b and choose the country

again.

After the LCD shows Accepted for a few

seconds, the machine will restart automatically.

CAUTION

If ink gets in your eyes, wash it out with water at

once and call a doctor if you are concerned.

NOTE

Make sure you install the Starter Ink Cartridges

included with your machine first.

Make sure that the power is turned on.

The Touchscreen will show

No Ink Cartridge.

NOTE

You can adjust the angle of the control panel by

lifting it. When lowering the control panel, make

sure you push the release button a that is

located behind the mark.

Open the ink cartridge cover a.