Do not install the scanner in locations subject to oil smoke, steam, humidity, and dust. Doing
so might cause a fire or electric shock.
To avoid low-temperature burn, do not operate the scanner while keeping touching its heat-
generating section such as the bottom of the scanner or the AC adapter for a long time.
Do not cover the scanner or the AC adapter with a cloth or blanket while the power is being
supplied to the scanner. This can help excessive heat generation, and may cause fire.
If you detect heat coming from the device or detect other problems such as smoke, strange
smells or noises, immediately turn off the scanner and then disconnect its power plug.
Make sure that the smoking has stopped, and then contact the store where you bought the
scanner or an authorized FUJITSU scanner service provider.
In case you have dropped the scanner and any of the parts (e.g., cover) is broken, disconnect
the power plug from the power outlet. Then, contact the store where you bought the scanner or
an authorized FUJITSU scanner service provider.
Do not insert or drop metal or flammable foreign objects into the scanner. Do not scan wet
documents or documents with paper clips or staples. Do not splash or allow the scanner to get
wet.
If foreign objects (water, small metal objects, liquids, etc.) get inside the scanner, immediately
turn off the scanner and disconnect the power plug from the power outlet, then contact the
store where you bought the scanner or the Maintenance Service Center.
Pay particular attention to this warning in households where there are small children.
Do not take apart or modify the scanner. The inside of the scanner contains high-voltage
components. Touching these components might cause fire or electric shock.
To avoid injuries, do not place the scanner in an area where small children may be able to
reach.
Do not use the scanner while driving a car for safety. Accidents can happen.
Do not install the scanner in a location exposed to direct sunlight or near any heating
apparatus. Doing so increases the inside temperature of the scanner, and a fire or failure may
occur. Install the scanner in a well-ventilated location.
Do not use the scanner at a place such as a bathroom, shower room, or swimming pool where it
may easily get wet or moistured. Doing so might cause electric shock or fire.
Firmly insert the power plug into the power outlet as far it can go.
Do not place heavy objects on the scanner or use the top surface of the scanner for
performing other work. Improper installation might cause injuries.
For your safety, unplug the power cord from the electrical outlet when the scanner is not used
for an extended period of time.
Do not move the scanner with the power and interface cables connected as this might
damage the cables, causing fire, electric shock or injuries.
Before moving the scanner, be sure to disconnect the power plug from the power outlet, and
disconnect data cables. Also, make sure that the floor is free of obstructions.
8
ScanSnap S510M Getting Started
Halaman Cetak