Brother DCP-9040CN Panduan Pengaturan Cepat - Halaman 18

Jelajahi secara online atau unduh pdf Panduan Pengaturan Cepat untuk Server Cetak Brother DCP-9040CN. Brother DCP-9040CN 30 halaman. Facsimile equipment
Juga untuk Brother DCP-9040CN: Brosur & Spesifikasi (4 halaman), Manual (7 halaman), Daftar Referensi Bagian (43 halaman), Panduan Pengaturan Cepat (31 halaman), Pembersihan dan Perawatan (7 halaman), Panduan Memulai Cepat (10 halaman), Panduan Pengaturan Cepat (20 halaman)

Halaman Cetak
Brother DCP-9040CN Panduan Pengaturan Cepat
STEP 2
Installing the Driver & Software

Firewall settings

Firewall settings on your PC may reject the necessary
network connection for Network Scanning and
Printing. If you are using the Windows
the instructions for Windows
Vista™. If you are using personal firewall software,
see the User's Guide for your software or contact the
software manufacturer.
For Windows
1 Click the Start button, Control Panel,
Network and Internet Connections and then
Windows Firewall.
Make sure that Windows Firewall on the
General tab is set to On.
2 Click the Advanced tab and Settings... button.
3 Click the Add button.
4 Add port 54925 for network scanning by
entering the information below:
In
1.
Description of service
- Enter any description, for example
"Brother Scanner".
2.
In
Name or IP address (for example
192.168.0.12) of the computer hosting this
service on your network
- Enter "Localhost".
3.
In
External Port Number for this service
- Enter "54925".
4.
In
Internal Port number for this service
- Enter "54925".
5.
Make sure
6. Click OK.
16
®
Firewall follow
®
XP SP2 or Windows
®
XP SP2 users:
:
:
is selected.
UDP
1
2
5
3
4
5 Click the Add button.
6 If you still have trouble with your network
connection, click the Add button.
7 Add port 137 for network scanning and
Network printing by entering the information
below:
1. In Description of service: - Enter any
description, for example "Brother Network
Print".
2. In Name or IP address (for example
192.168.0.12) of the computer hosting this
service on your network: - Enter
"Localhost".
3. In External Port Number for this service:
- Enter "137".
4. In Internal Port number for this service:
- Enter "137".
5. Make sure UDP is selected.
6. Click OK.
8 Make sure that the new settings are added and
checked, and then click OK.
:
:
®
Windows