Brother DCP-J4110DW Panduan Pengaturan Cepat - Halaman 39

Jelajahi secara online atau unduh pdf Panduan Pengaturan Cepat untuk Server Cetak Brother DCP-J4110DW. Brother DCP-J4110DW 41 halaman. Guia de wi-fi direct
Juga untuk Brother DCP-J4110DW: Manual (36 halaman), Manual (22 halaman), Panduan Pengaturan Cepat (27 halaman), Panduan Keamanan Produk (25 halaman), (Spanyol) Panduan Guia De Web Connect (38 halaman), Manual (Spanyol) (24 halaman)

Halaman Cetak
Brother DCP-J4110DW Panduan Pengaturan Cepat

For Network Users

Reset the network settings to factory default

To restore all network settings of the internal Print/Scan server to the factory default, please follow the steps below.
a
Make sure the machine is idle, then disconnect all the cables from the machine (except the power cord).
b
Press Settings.
c
Press s or t to display Network, and then press Network.
d
Press s or t to display Network Reset, and then press Network Reset.
e
Press Yes.
f
Hold down Yes for 2 seconds to confirm.
g
The machine will restart, re-connect the cables once this is complete.

Entering Text for Wireless Settings

Up to four letters are assigned to each letter button on the Touchscreen. By pressing the correct button repeatedly,
you can access the character you want.
Press
to cycle between letters, numbers and special characters. (The characters available may differ
depending on your country.)
Inserting spaces
To enter a space, press
Repeating characters
If you need to enter a character that is on the same button as the character before, press c to move the cursor to
the right.
Making corrections
If you entered a character incorrectly and want to change it, press
character.
then press the space button
or
.
to delete it and re-enter the correct
39